149Before Requesting ServiceCheck 1 No movie can be recordedMovie can be recorded only on DVD-RAM or DVD-Rdisc.Check the following:• Is the correct type of disc inserted?• Is power switch set to “ ”?• Is the DVD-RAM disc in DVD Video Camera write-protected? Release the write-protect.• If you are using a DVD-R, has it been finalized?• Does disc have remaining recording space?If movie still cannot be recorded after the abovechecks, the disc may be damaged: use another disc.Check 2 No still can be recordedStill can be recorded only on DVD-RAM disc or SDMemory Card.Check the following:• Is the correct type of disc or card inserted?• Is power switch set to match the recording medium?− When using DVD-RAM disc:Set to “ ”.− When using SD Memory Card:Set to “ ”.• Is loaded DVD-RAM disc write-protected?• When using SD Memory Card: is it locked?• Does disc or card have remaining recording space?If still cannot be recorded after the above checks, thedisc or card may be damaged: use another disc orcard.Check 3 Skip or search playback doesnot work wellIf the temperature inside the DVD Video Camera ishigh, normal operation may not be possible. Turn theDVD Video Camera off, wait for a few moments, andthen turn it on again for operation.Check 4• No operation can beperformed because theACCESS/PC or CARDACCESS indicator on this DVDVideo Camera remains lit orblinking.• After disc or card is inserted, ittakes some time untilrecording is possible.In the following cases, it will take more time than usualuntil operation is possible:• When a disc has just been inserted• When the last action was to turn off the power, anda long period of time has passed since then• When the temperature is greatly different from thetime of previous recording• When disc with scratches, dirt or fingerprints isinserted• When disc is subject to severe vibrations• When the battery or DC cord was disconnectedinstead of following the correct procedure usingpower switch to turn the DVD Video Camera off
