143 Export video clips to PC using DVD-MovieAlbumSE.4 DVDfunSTUDIO program will automatically start. (see page 144 for details)5 Edit video clip files and introduce interactive DVD menus using DVDfunSTUDIO Software.6 Insert a new DVD-R disc into the DVD Video Camera.• When making an original DVD-R disc using DVDfunSTUDIO software, a message for initializationappears on the LCD of DVD Video Camera. Select “No” and then follow the instructions on the screenof your PC to make the original DVD-R disc. Do not perform initialization of the DVD-R disc on theVideo Camera when using a DVD-R disc with your computer.7 Write the final movie to the DVD-R disc with DVDfunSTUDIO.• Write the final movie to an 8 cm DVD-R disc in this DVD Video Camera using DVDfunSTUDIO software.Cautions for use• When you are making a recording on a new DVD-R disc in your DVD Video Camera, you must initializethe disc before recording video clips. DVD-RAM disc and SD Memory Card do not requireinitialization.• DVD-R discs are a one time write format; therefore, when you write information to the DVD-R discwith DVDfunSTUDIO, you cannot edit it again.• When using DVD-MovieAlbumSE software on Windows® 2000 Professional / XP Home Edition /XP Professional, log on to your PC as Administrator.• Set the display resolution to 1024 × 768 (16 bits color) or higher.Display Settings method as follows:Select “Start” >> “Control Panel” >> “Display” and select “Settings” tab on “Display”, and then adjust “ScreenResolution” and “Color quality”.• Depending on the condition of your PC, it may take a long time to install the software.
