142If you insert an unformatted DVD-R disc in the DVD Video Camera. . . .The following message is displayed on the camera monitor: “This disc must be formatted before it can beused by this camera”.Follow these steps when authoring DVD-R discs with DVDfunSTUDIO.1 Press the g button to cancel formatting.Formatting discs at this time prevents you fromusing them with DVDfunSTUDIO. (However,formatted discs can be used for recordingmovies and shots and with the camera.)2 Start DVDfunSTUDIO.3 Choose Preference from the Tool menu. In DVDdrive, choose the DVD Video Camera.Before closing the USB connection (disconnecting the USB cable) or togglingthe power switchYou must follow the steps to stop the drive before disconnecting the USB cable from the computer ortoggling between Disc Mode and Card Mode with the power switch while the USB cable is connected.lStopping the Drive1 Close the application. In Windows, click theicon in the task tray (in the lower-right corner).2 Choose “Safely remove USB Mass StorageDevice” (for Windows XP).A message will inform you that hardware may bedisconnected.Close the application and make sure the cameraaccess indicator is green before disconnectingthe USB cable.lToggling the Power Switch1 Disconnect the USB cable following theinstructions in “Stopping the Drive” (see above).2 You may now toggle the power switch.3 Reconnect the DVD Video Camera to thecomputer with the USB cable.
