1261Updating Control Information of DVD-RAM Disc (Update Control Info.)Disc Navigation in this DVD Video Camera handles information on scenes, such as thumbnail, skip, or fade,in a particular manner. If you use another device to edit a disc recorded on this DVD Video Camera, andthen use the data again with Disc Navigation in this DVD Video Camera, the Disc Navigation may notappear normally. If this happens, use the Update Control Info function to update the data.1 Press the DISC NAVIGATION button.2 Press the MENU button.3 Choose “Update Control Info.” on the “Disc”menu screen, and then press the A button.The screen for verifying “Update Control Info.”will appear.4 Choose “YES”, and thenpress the A button.The message forproceeding will appear,and then the DiscNavigation menu screenwill be restored.A black screen may appear while the messagefor updating is displayed.Choose “NO” to cancel updating.5 Press the g button to quit.Note :• It may take time to update the control information if thedisc has many recorded scenes.• Pressing the g button on the verification screen willrestore the thumbnail display screen.Before You Begin• Use the AC adaptor to power the DVD Video Camera for updating controlinformation, and make sure that power is not turned off during updating.If the DVD Video Camera is turned off during updating and the updatingis interrupted, the control information will not be updated correctly.ENTERUpdate Control Info?Update Control Info.YES NO
