37480i (60Hz)480p (60Hz)576i (50Hz)576p (50Hz)720p (60Hz)720p (50Hz)1,080i (60Hz)1,080i (50Hz)1,080i (50Hz)*640 × 400 @70 Hz640 × 480 @60 Hz640 × 480 @75 Hz852 × 480 @60 Hz800 × 600 @60 Hz800 × 600 @75 Hz800 × 600 @85 Hz1,024 × 768 @60 Hz1,024 × 768 @70 Hz1,024 × 768 @75 Hz1,024 × 768 @85 Hz1,280 × 1,024 @60 Hz1,366 × 768 @60 HzMacintosh13’’ (640 × 480)Macintosh16’’ (832 × 624)Macintosh21’’ (1,152 × 870)• Use eyeglass cleaner to remove stubborn dirt from the LCD.• Never use alcohol, paint thinner or benzine to clean this unit.• Before using chemically treated cloth, read the instructions that came with thecloth carefully.• Do not wipe the LCD with water.NeutraldetergentTo clean this unit, wipe with a soft, dry cloth.If the surfaces are extremely dirty, use a soft cloth dipped in soap-and-water solutionor a weak detergent solution.Wipe the cabinet with a soft cloth.If the cabinet is heavily soiled, wipe with a well-wrung soft cloth dipped in neutral cleanser diluted with water.CAUTION:If water or similar substances get inside the monitor via the liquid crystal panel surface, a malfunction may result.MaintenanceInput signal that can be displayedApplicable input signal for Component (Y, PB, PR), HDMI and PC (D-sub 15P) (∗ Mark)Notes:• Signals other than above may not be displayed properly.• Applicable input signal for PC is basically compatible to VESA standard timing.• PC signal is magnified or compressed for display, so that it may not be possible to show fine detail with sufficientclarity.• * : Based on SMPTE295M standard.Signal name Horizontalfrequency (kHz)Verticalfrequency (Hz) Component HDMI PC15.7331.4715.6331.2545.0037.5033.7528.1331.2531.4631.4737.5031.4737.8846.8853.6748.3656.4860.0268.6863.9848.3635.0049.7268.6859.9459.9450.0050.0060.0050.0060.0050.0050.0070.0759.9475.0059.9460.3275.0085.0660.0070.0775.0385.0060.0260.0066.6774.5475.06∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗