Panasonic TX-26LX500A Operating Instructions Manual

Also see for TX-26LX500A: Service manual Service manual

Panasonic TX-26LX500A Operating Instructions Manual Manual pdf 17 page image

17Menu mode will be memorized for each TV, AV1, AV2,AV3, AV4, PC, HDMI and Card operations mode.Dynamic / Standard / Cinema / AutoYou can change the level of each Item (Contrast,Brightness, Colour, Sharpness, NTSC-Tint, Colourtemperature, C.Management, D.PNR, MPEG NR and 3D-COMB) for each Menu (Dynamic, Standard, Cinema andAuto) according to your personal preference.Note:C.A.T.S. (page 10) is in effect when Menu mode is set to Auto.Increase or decrease the levels of these options accordingto your personal preference.The picture hue can be adjusted to suit your taste.Notes:• When the TV is receiving NTSC signals, NTSC-Tint isdisplayed and level adjustment is possible.• When the TV is receiving YUV (60Hz) signals, Tint isdisplayed and level adjustment is possible.MENUTV1 2 34 5 67 8 90OKOKMain menuPicture menuSound menuSetup menuPicture menuPress the MENU button.Move to choose Picture menu.Access Picture menu.Move to choose menu option.Adjust chosen option or access chosen menu.Press the EXIT button at any time to go back to watching TV.MenuNTSC-Tint (Tint)EXITMenuContrastBrightnessColourSharpnessNTSC-TintPicture menuColour temperatureColour managementStandardOnD. PNRMPEG NRAutoMid3D-COMB OnPicture menuDynamicAllows you to set the overall colour tone of the picture. Choose from Cool, Standard and Warm.Enables vivid colour adjustment automatically.Reduces noise in a channel with many noises.Remains Off when receiving a strong signal.Off: Recommended mode when receiving a strong signal.Strong: Applies strong noise reductions regardless of input signals.Weak: Applies weak noise reductions regardless of input signals.Auto: Automatically reduces unwanted picture noise.Contrast, Brightness, Colour, SharpnessColour temperatureColour managementD.PNRReduces MPEG noise.Allows you to choose from Off, Strong, Mid and Weak.This function is effective in reducing the digital block noise when viewing DVD, VCD, SD card ordigital broadcasting.The effect will be changed based on the scene and image.MPEG: Compression technology of the image signal adopted by DVD, VCD, SD card or digitalbroadcasting.Occasionally, whilst viewing still or slow moving pictures, colour patterning may be seen. Set3D-COMB to On to display sharper and more accurate colours.Displayed only when receiving PAL or NTSC signals.Not displayed during RGB Video, S Video, Component, PC, HDMI input and Card operations.MPEG NR3D-COMBNoteBy pressing the N button on the remote control while the Picture menu is displayed, the selected menu will bechanged to the Normal mode.Normalization will not occur if the menu is not displayed when the N button is pressed.The Normal mode is the factory preset condition. Returning to this original condition is called “Normalization”.