Panasonic TX-26LX500A Operating Instructions Manual

Also see for TX-26LX500A: Service manual Service manual

Panasonic TX-26LX500A Operating Instructions Manual Manual pdf 13 page image

13Select the system.China HK/UK Asia/M.East NZ/INDONES AustraliaJapan CATV America SPECL Ver E.EuropeChinaHK/UKAsia/M.EastNZ/INDONESAustraliaE.EuropeSPECL VerAmericaCATVJapanChinaHong Kong, United KingdomMalaysia, Singapore, Thailand, Asia countries, Kuwait, Saudi Arabia, United Arab Emirates, Middle East countries, etc.New Zealand, Indonesia, etc.AustraliaCIS, Poland, etc.South AfricaUSA, Chile, Mexico, Panama, Pelu, Philippines, Taiwan, Venezuela, etc.USA CATVJapanSys select REGIONAllows you to automatically retune the TV. Useful if you move house and wish to retune yourTV to the local stations. See page 14.Allows individual program positions to be tuned, manually. See page 15.Allows you to change the sound system used for a programme channel.Choose the required sound system:4.5 MHz / 5.5 MHz / 6.0 MHz / 6.5 MHzLets you select the correct transmission standard for the transmission signal being received.See page 19.Auto / PAL / SECAM / NTSC 4.43 / NTSC 3.58Use to make small adjustments to the tuning of an individual station (useful for example whenweather conditions are affecting reception quality of a program).To cancel the Fine tuning, tune again by Manual tuning.It is possible to skip Program Number on which no TV stations are tuned appearing on thescreen. The function is only effective when pressing the Program Number up or down buttoneither on the TV set or on the remote control. Under the normal viewing, select the ProgramNumber you would like to skip. Then, access Tuning menu and set Skip to On.TuningDuring TV modePress the MENU button.Move to choose Setup menu.Access Setup menu.Move to choose Tuning menu.Access Tuning menu.Move to choose menu option.Adjust chosen option or access chosen menu.Press the EXIT button at any time to go back to watching TV.Pressing the OK button after having adjusted some featureswill store the setting as the default (replacing the factory setting).MENU1 2 34 5 67 8 90OKOKOKSys select(System selection)Auto tuningManual tuningSound systemColour systemFine tuningSkipEXITTuning menuMain menuPicture menuSound menuSetup menuTOPOffTeletextOff timerCh colour setChild lockBlue backTuning menuSetup menuOffAccessOnSys selectAuto tuningManual tuningSound systemSkipTuning menuColour systemFine tuningAutoOffAustralia5.5MHz