Panasonic TX-26LX500A Operating Instructions Manual

Also see for TX-26LX500A: Service manual Service manual

Panasonic TX-26LX500A Operating Instructions Manual Manual pdf 14 page image

14TuningAuto tuning automatically retunes your TV. This feature is useful if, e.g., you move house and wish to retune yourTV to receive the local stations.Press the MENU button.Move to choose Setup menu.Access Setup menu.Move to choose Tuning menu.Access Tuning menu.Move to choose Auto tuning.Access Auto tuning.The TV will search for, locate, store and then sortinto order your local stations.Once this operation is completed the TV will displaythe programme now stored on programme position 1.Note:• If you exit the procedure after this point and beforeAuto tuning is complete, no station information willbe stored. Restart and complete the Auto tuningprocedure so that the TV is retuned.Press the EXIT button at any time to go back to watchingTV (please read the Note in the above procedure).MENUOKTV1 2 34 5 67 8 90OKAUTO SETUP IN PROGRESSSEARCHING : PLEASE WAIT12ReturnExitPress F until Tuning mode is reached.Press –/ or +/ to access Tuning mode.Press F until Auto tuning is reached.Press –/ or +/ to start search.Press TV/AV at any time to exit the Tuning menu.It is also possible to use the control panel buttons on the front of the TV to tune individual programme positions:Notes:• If a clear picture with correct colours cannot be obtained when a Broadcast or AV signal is received, refer to theColour system selection on page 13.• After the Auto tuning is finished, press the Programme Number up button to confirm the tuning condition for eachProgramme Number. If some Programme Numbers are unused, it is possible to skip such Programme Numbers.Please refer to the Skip function on page 13.STR F TV/AVAuto tuningEXITAuto tuning (via front panel)