Panasonic TH-80OLFB70U Operating Instructions Manual

Also see for TH-50LFB70E: Operating instructions Operating instructions

Panasonic TH-80OLFB70U Operating Instructions Manual Manual pdf 14 page image

14Network SettingsWireless LANYou can make detailed wireless LAN settings. (You cannot select AD HOC mode with this display.)Setting network numberSelect [Wireless LAN] in [Network Settings] menu and press1 button.Select the number to be connected for2 [Wireless LAN].[Off], [S-DIRECT], [M-DIRECT], [USER1]-[USER3]•Selecting [Off] disables the wireless LAN.•Network number: [S-DIRECT] is available only when connecting via wireless LAN with the application software• the “Wireless Manager”. For details, refer to the operation manual of the “Wireless Manager”.Wireless LANSaveWireless LAN OffConfi guration of Wireless LAN [M-DIRECT]Even if there is no access point, you can still connect the Display to computer via the infrastructure. In addition, theconnection with the iPad / iPhone / iPod touch is much easier.For more information, see the website below.http://panasonic.net/prodisplays/download/software/index.htmlSelect [M-DIRECT] for [Wireless LAN].1 Wireless LANSaveWireless LANIP address 192.168. 10.100M-DIRECTSubnet mask 255.255.255. 0SSID1Channel********KeyWireless Network StandbyWireless WEB ControlPress ▼ to go to the next item.2 IP address(Displaying and setting the IP address) Enter the IP address.Subnet mask(Displaying and setting the subnet mask) Enter the subnet mask.SSID Select [M-DIRECT] in [Wireless LAN], then the SSID can be set.Entering characters page 18Channel Select [M-DIRECT] in [Wireless LAN], then the Channel can be set.Select a channel for the access point ( page 8).KeySelect [M-DIRECT] in [Wireless LAN], then the Key can be setSetting a key for the access point. Input either 8 to 63 alphanumerics ora 64 digit string in the hexadecimal format.Wireless Network Standby(for TH-80LFB70U, TH-80LFB70W)Set to [On] when using wireless web control or command control to turnthe power off/on. When set to [On], power consumption in standby ishigher than when set to [Off]. (This function is not supported byTH-80LFB70E.)Wireless WEB Control Set to [On] when controlling the display from a web browser on a PCconnected via wireless LAN.You can configure more precise network settings, if you select [M-DIRECT] or [USER1] - [USER3] (user) for[Wireless LAN].1 Select the item and press button.IP addressOk CancelAll deleteDelete1 2 34 5 67 8 90 .000.192.168.0102 Delete the current numbers. ([Delete] or [All delete])3 Enter numbers and dots using numeric keypad onthe screen.4 Select [Ok] and press button.To cancel changing the address, select [Cancel] andpress button.