34Crestron Connected™ pageYou can monitor or control the Display using Crestron Connected™.When you click [Crestron Connected™], the Crestron Connected™ operation page is displayed.If Adobe Flash Player is not installed in your computer, or if the browser does not support Flash, this page does notappear. In this case, return to the previous page by clicking [Back] in the operation page.Operation page 1 Tools, Info, HelpSwitches the pages for tools, information, helpusing the tab.2 POWERSwitches between on and off of the power.3 VOL DOWN, AV MUTE, VOL UPSets the volume, AV mute. When the power of theDisplay is turned off, VOL DOWN, AV MUTE andVOL UP are not available.4 Input SelectSets the input selection. When the power ofthe Display is turned off, this operation is notavailable.5 Operation buttons on the menu screenOperates on the menu screen.6 Image quality adjustmentsOperate items related to image quality.7 BackReturns to the previous page.1 Control systemSets the information required for the communicationwith the controller that is connected to the Display.2 User PasswordSets the password for the user rights in the operationpage of Crestron Connected™.3 Admin PasswordSets the password for the administrator rights in theoperation page of Crestron Connected™.4 Network statusDisplays the setting of LAN.DHCP: Displays the value in the current setting.IpAddres: Displays the value in the current setting.SubnetMask: Displays the value in the current setting.DefaultGateway: Displays the value in the current setting.5 ExitReturn to the operation page.Tools pageClick Tools on the operation page.When you monitor or control the Display using Crestron Connected™, set “Crestron Connected™” to “On” in the“Network Settings” menu. (see page 19)1Panasonic LCD Display234567Panasonic LCD Display12534Using Web Browser Control