Panasonic TH-80OLFB70U Operating Instructions Manual

Also see for TH-50LFB70E: Operating instructions Operating instructions

Panasonic TH-80OLFB70U Operating Instructions Manual Manual pdf 11 page image

11Hub or broadband routerNetwork connections via DIGITAL LINK terminalA twisted pair cable transmitter such as the Panasonic Digital Interface Box (ET-YFB100G) uses twisted pair cablesto transmit inputted video and audio signals, and these digital signals can be input to the Display via the DIGITALLINK terminal.Installing / Connectingg g● Ask the dealer or a qualified technician to carry out the cable wiring work for DIGITAL LINK connections.Insufficient wiring work may cause the inability to apply the cable transmission characteristics and croppedor fuzzy images and sounds.● The transmission distance between the twisted pair cable transmitter and the device is up to 100 meters.Exceeding this distance can cause cropped images or sounds, as well as LAN communication errors.● Do not use a hub between the twisted pair cable transmitter and the Display.● When connecting to the Display using the twisted pair cable transmitter (receiver) of other maker, do notuse another twisted pair cable transmitter between the twisted pair cable transmitter of other maker andthis device. The images and sounds may be interrupted or become unstable.● If possible, lay the cable so that it is extended and not coiled in order to minimize both external and internal noise.● Lay out cables of the twist pair cable transmitter and this product away from other cables, especially fromthe power supply cable.● When laying multiple cables, keep them as close together as possible running parallelly and not bundled.● After laying the cable(s), make sure that the signal quality in “DIGITAL LINK status” is -12 dB or below.Twisted pair cablesp● Use a LAN cable between the twisted pair cable transmitter and the device that conforms to the followingconditions.● It meets or exceeds CAT5e standards● It is a shielded cable (with a connector)● When laying the cable(s), use an instrument such as a cable tester or cable analyzer and check whether the cablecharacteristics are CAT5e or above. When using a relay connector along the path, also include this in the measurements.● Do not pull cables hard. Also avoid forcefully bending or folding them.Other● This device is compatible with our Digital Interface Box (ET-YFB100G). For the twisted pair cable transmitterof the other maker, see the website: http://panasonic.net/prodisplays/support/digitallink.htmlPrecautions for use while connecting with a twisted pair cable transmitterDisplay (rear surface of the main body)DIGITAL LINK terminalLAN cable(commercial) LAN cableL(commercial)PCWhen a Panasonic ET-YFB100G is used● It is a straight cable● It is a solid cableExample of Network Connection (DIGITAL LINK)Confi gure the settings in “Network Settings when using a DIGITAL LINK connection. (see pages 20 to 22)ConnectionLAN cacable(not suppupplied)