Panasonic TH-80OLFB70U Operating Instructions Manual

Also see for TH-50LFB70E: Operating instructions Operating instructions

Panasonic TH-80OLFB70U Operating Instructions Manual Manual pdf 15 page image

15Confi guration of Wireless LAN [USER1] - [USER3]Select [USER1] – [USER3] for [Wireless LAN].1 Wireless LANSaveWireless LANName ChangeUSER1DHCP OffIP address 192.168.11.100Subnet mask 255.255.255. 0Gateway 192.168.11.1SSIDSet [DHCP].2 When [Off] is selected, IP address and other settings can be set manually.Name Change You can change the user name. Entering characters page 18DHCP(DHCP client function)On: If a DHCP server exists in the network to which the display isconnected, the IP address will automatically be acquired.Off: If a DHCP server does not exist in the network to which thedisplay is connected, additionally set [IP address], [Subnet mask]and [Gateway].IP address(Display of IP address and setting) Enter the IP address if DHCP server is not used.Subnet mask(Displaying and setting the subnet mask) If not using a DHCP server, enter the subnet mask.Gateway(Display of gateway address and setting) Enter the gateway address if DHCP server is not used.If [DHCP] is set to [On], the IP address and other items are not displayed. Check the [Network Status] page for• the current IP address and other items. (See page 20)Before using the DHCP server, make sure the DHCP server is already functioning.• For details of IP address, subnet mask, and gateway, ask the network administrator.•A wired LAN and wireless LAN cannot be used in the same segment.•Network SettingsSelect [Save] and press3 button.Save the current network settings.Default settings of [M-DIRECT]■ The following settings as [M-DIRECT] in the [Wireless LAN] are set before the Display leaves the factory.IP address 192.168.11.100Subnet mask 255.255.255.0SSID M-DIRECT + The last 4 digits of the Display IDChannel 1Key The same string as the SSIDWireless NetworkStandby Off (for TH-80LFB70U, TH-80LFB70W)Wireless WEB Control OffThe authentication method is WPA2-PSK, and the encryption method is AES. Both methods are fixed.• When you need to change initial configuration of [M-DIRECT], please contact your network administrator.• Make sure the initial Key is changed for safety.• As the DHCP server is already functioning, select [ON] before connecting a computer.•1 Select the item and press button.IP addressOk CancelAll deleteDelete1 2 34 5 67 8 90 .000.192.168.112 Delete the current numbers. ([Delete] or [All delete])3 Enter numbers and dots using numeric keypad on the screen.4 Select [Ok] and press button.To cancel changing the address, select [Cancel] andpress button.