Panasonic TH-80OLFB70U Operating Instructions Manual

Also see for TH-50LFB70E: Operating instructions Operating instructions

Panasonic TH-80OLFB70U Operating Instructions Manual Manual pdf 23 page image

23Connecting with Wired LANTo use the network function, make the necessary settings in [Network Settings] and be sure to set LAN to enabledin [Control I/F Select] and [DIGITAL LINK mode]. (See page 20)Computer operationConnection can be made with wired LAN. However, confirm to your system administrator on network settingsbefore changing any settings.Turn on the computer.1Make the network setting according to your system administrator.2 If the Display settings are the default settings (See page 13), the computer can be used with the followingnetwork settings.IP address 192.168.10.101Subnet mask 255.255.255.0Gateway 192.168.10.1Computer operationMake the network setting according to your system administrator.1 If you select [M-DIRECT] for [Wireless LAN] in the [Network Settings] menu, the IP address will• automatically be acquired.If you select default settings of [USER1] - [USER3] for [Wireless LAN] in the [Network Settings] menu (see• page 17), then the computer can be used with the following network settings.IP address 192.168.11.101Subnet mask 255.255.255.0Gateway 192.168.11.1Connect to the wireless network that has the same [SSID] set with the Display.2 When you select default settings of [M-DIRECT] for [Wireless LAN] in the [Network Settings] menu, theSSID is [M-DIRECT + The last 4 digits of the Display ID].When you select default settings of [USER1] - [USER3] for [Wireless LAN] in the [Network Settings] menu,the SSID is [Panasonic Display].If you use any wireless utility other than Windows [Wireless Network Connection], follow its operation• procedure for connection.If you use the access point, configure the Display and each network setting of the computer following the• instruction of the network administrator.Connecting with Wireless LAN