Panasonic TH-75BQE1W Operating Instructions Manual

Also see for TH-65BFE1W: Operating instructions Service manual

Contents

Panasonic TH-75BQE1W Operating Instructions Manual Manual pdf 7 page image

7EnglishIMPORTANT: THE MOULDED PLUGFOR YOUR SAFETY, PLEASE READ THEFOLLOWING TEXT CAREFULLY.This display is supplied with a moulded three pinmains plug for your safety and convenience. A 10amp fuse is fitted in this plug. Shall the fuse need tobe replaced, please ensure that the replacement fusehas a rating of 10 amps and that it is approved byASTA or BSI to BS1362.Check for the ASTA mark or the BSI mark onthe body of the fuse.If the plug contains a removable fuse cover, you mustensure that it is refitted when the fuse is replaced.If you lose the fuse cover the plug must not be useduntil a replacement cover is obtained.A replacement fuse cover can be purchased fromyour local Panasonic dealer.Do not cut off the mains plug.Do not use any other type of mains lead except theone supplied with this display.The supplied mains lead and moulded plug aredesigned to be used with this display to avoidinterference and for your safety.If the socket outlet in your home is not suitable, get itchanged by a qualified electrician.If the plug or mains lead becomes damaged,purchase a replacement from an authorized dealer.WARNING : — THIS DISPLAY MUST BE EARTHED.How to replace the fuse.Open the fuse compartment with a screwdriver andreplace the fuse.Safety PrecautionsWARNING■ SetupThis LCD Display is for use only with the followingoptional accessory.Use with any other type of optional accessories maycause instability which could result in the possibilityof injury.(The following accessory is manufactured by PanasonicCorporation.)Please firmly install the Pedestal sold separately.Installation should be done by a professional vendor.Work in a team of 4 persons when installing.Pedestal• TY-ST75PE9Note● When installing the Pedestal, thoroughly read theinstructions manual included with the product andcorrectly install the stand. Make sure to take the fall-prevention measures.● For ensuring safety and performance, ask yourdistributor or a professional vendor to carry out theinstallation work.● Please note that we will not be responsible for anyproduct damage that happens due to defects in theinstallation environment of stand or wall-mountingclasp even if it is within the warranty period.● For the products that you are no longer using, aska professional contractor to promptly remove suchproducts.● When installing, “crack in LCD panel” may occurbecause of impact etc. Therefore, please carefullyhandle the product.● The part numbers of optional items are subject tochange without notice.We are not responsible for any product damage, etc.caused by failures in the installation environment evenduring the warranty period.Always be sure to ask a qualified technician to carry outset-up.Small parts can present choking hazard if accidentallyswallowed. Keep small parts away from young children.Discard unneeded small parts and other objects,including packaging materials and plastic bags/sheets toprevent them from being played with by young children,creating the potential risk of suffocation.Do not place the Display on sloped or unstablesurfaces, and ensure that the Display does not hangover the edge of the base.• The Display may fall off or tip over.Install this unit at a location with minimal vibrationand which can support the weight of the unit.• Dropping or falling of the unit may cause injury ormalfunction.