Panasonic TH-75BQE1W Operating Instructions Manual

Also see for TH-65BFE1W: Operating instructions Service manual

Contents

Panasonic TH-75BQE1W Operating Instructions Manual Manual pdf 41 page image

41English■ Menu screen of pictureYou can adjust picture quality by either selecting [Picture] in the [Main Menu] and pressing the [OK] button of theremote control, or by displaying the [Picture] menu with the [PICTURE] button of the remote control.PicturePicture ModeBacklightColor TemperatureGammaNoise ReductionAdaptive ContrastOver ScanAspect RatioColor RangePC settingReset Picture SettingDynamic100115002.2MiddleOffOff16:9AutomaticMenu screen of picture[Picture Mode] You can go to the [Picture Mode] menu by using the [OK] button of the remote controland you can change to the following modes.[Picture Style]:You can select the mode that is suitable to the image to be displayed.[Dynamic]: Brightness will become maximum.[Cinema]: It is suitable for playback of cinema contents.[Custom]: It will use the custom image settings saved earlier ([Standard] settings areused in the default mode). You can set a custom mode in [Picture Mode] -[Custom] of the OSD menu screen.[Standard]: It is the standard image quality.• [Cinema] will be available for selection according to the input signal.You can make the following settings to determine the picture style.[Contrast]: Adjusts the difference between light and dark of images.[Brightness]: Adjusts light and dark of the entire screen.[Sharpness]:Adjust the sharpness of image outlines.[Tint]: Adjust the tint of entire images.The hues of red, green, blue, yellow, cyan and magenta can be respectively set.[Color]: Adjusts the colour of images.The saturations of red, green, blue, yellow, cyan and magenta can berespectively set.Adjusting these will store the values as [Picture Style: Custom].• Depending on input images, changes occurring by adjusting these settings may besmall.[Backlight] Adjusts the settings of back light.[Color Temperature] Adjusts colour temperature and gain.[Gamma] Selects the settings of gamma.[Noise Reduction] It adjusts the extent of reducing noise.[Adaptive Contrast] It turns on / off the function of automatically adjusting the contrast after determining howto use the colours.[Over Scan] Adjusts the settings of over scan. (It will not work in PC input.)[Aspect Ratio] It adjusts the settings of aspect ratio.• When [Over Scan] is [Off], you can select only [4:3], [16:9], and [Dot By Dot].