Panasonic TH-75BQE1W Operating Instructions Manual

Also see for TH-65BFE1W: Operating instructions Service manual

Contents

Panasonic TH-75BQE1W Operating Instructions Manual Manual pdf 27 page image

27English■ Power management functionIn terms of power saving feature, the device supports the following 4 power off functions.[Sleep Timer]• You can set the timer and turn off the power supply of the display irrespective of the current status of signal of thesource.You can set the sleep timer in the OSD menu to [5 Min], [15 Min], [30 Min], [60 Min], [90 Min], [120 Min], [180 Min],and [Off].• This value will not be saved. Only one value will be executed. Default setting is [Off].[Power Management Setting]• It will turn off the power supply of the display (standby mode) when there is no input signal from the current source.This is applicable to HDMI/DVI-D/PC input. This setting can be adjusted in the range of 30 seconds to 300 secondsor can be set to [Disable].• This value will be saved. Default setting is [300 Sec].• When the power supply is turned off (standby mode) because of this function, if the signal is once again fed to thesame input that turned off, power supply of the display will turn on.• It will show the remaining number of seconds starting from 20 seconds before the power supply turns off.Note● Power management function may not work normally depending on the video output device. In this case, set thisfunction to [Off].[No Activity Power Off]• If this is set to [Enable], the power supply will automatically turn off (standby) when the device is not operated formore than 4 hours.• It will show the remaining time starting from 3 minutes before the power supply turns off.• When the power supply has turned off because of this function, [Last turn off due to ‘No Activity Power Off’.] willappear when the power supply is started next time.[Scheduler]• You can set 7 schedules that decide the power supply on time and the power supply off time. Refer to the Schedulerfunction for detailed settings. (see page 46)Note● The display has the priority mode that sets priority of each setting. (see page 44)• The settings of [Scheduler] will have higher priority than the settings of [Sleep Timer] and power management.• [Sleep Timer] and power management has the same priority. When both are enabled, power supply off time isdecided depending on the setting of power management or [Sleep Timer].Power indicatorStatus LEDMain power supply off Light outPower supply off mode RedPower supply standby when [Scheduler] is enabled OrangePower supply on mode GreenDiagnosis (defects are detected) When blinks in red colour: Contact your dealer.