Panasonic TH-75BQE1W Operating Instructions Manual

Also see for TH-65BFE1W: Operating instructions Service manual

Contents

Panasonic TH-75BQE1W Operating Instructions Manual Manual pdf 21 page image

21EnglishConnecting with the analogue video source■ Analogue connection1 Connect the signal cable (PC cable) with the PC IN terminal.2 Select [PC] by using the [INPUT] button of LCD display, or the [˄ / ˅] button of the remote control where [INPUT] isindicated. Selecting this will automatically change audio to [AUDIO IN].Note● You can also directly select [PC] by using the [PC] button of the remote control.Audio connection:Connect the audio cable (ø3.5 mm stereo mini plug (commercially available)) to the AUDIO IN connector. Audio willautomatically change to [AUDIO IN]. Therefore, audio will output by just connecting the cable.Connecting with the digital video source■ Digital connectionConnection through HDMI terminal1 Connect the commercially available HDMI cable to the HDMI 1 or HDMI 2 terminal.2 Select [HDMI1] or [HDMI2] according to the connector that is connected by using the [INPUT] button of LCDdisplay, or the [˄ / ˅] button of the remote control where [INPUT] is displayed.Note● You can also directly select [HDMI1] or [HDMI2] by using the [HDMI] button of the remote control.Audio connection during HDMI input:You can select HDMI and AUDIO IN for HDMI input. (see page 43)Connection through DVI-D IN terminal1 Connect the commercially available DVI-D cable to the DVI-D IN terminal.2 Select [DVI-D] by using the [INPUT] button of LCD display or the [INPUT] button of the remote control.Note● You can also directly select [DVI-D] by using the [DVI] button of the remote control.Audio connection during DVI-D input:Only AUDIO IN input is available in DVI-D input.Note● Depending on the outer shape of the plug, it may come in contact with the plug of the adjacent connection cables orperipheral parts such as back cover. Please use the connection cable of the plug size appropriate for the mounting.● Because of the structure of the terminal area, you may not be able to use some cables depending on the connectioncable / USB flash drive. Please make sure to check ‘terminal area drawing’ provided in the specifications.https://panasonic.net/cns/prodisplays/download/spec_manual/