Panasonic TH-55LFV70U Operating Instructions Manual

Also see for TH-55LFV70U: Operating instructions Operation instruction Operating instructions

Contents

Panasonic TH-55LFV70U Operating Instructions Manual Manual pdf 43 page image

43SETUPColour systemSelect Signal from the “Setup” menu during Video input signal mode.Colour system AutoPress to select the “Colour system” .Press to select each function.If the image becomes unstable:With the system set on Auto, under conditions of low levelor noisy input signals the image may in rare cases becomeunstable. Should this occur, set the system to match the formatof the input signal.Colour system: Set the colour system to match the input signal. When “Auto” is set, Colour system will be automaticallyselected from NTSC/PAL/SECAM/NTSC 4.43/PAL M/PAL N.To display PAL60 signal, select “Auto”.Auto SECAM NTSC PAL M PAL NNTSC 4.43PALCinema realityCinema reality: When On, the display attempts to reproduce a more natural interpretation of sources such as moviepictures, which are recorded at 24 frames per second.If the picture is not stable, turn the setting to Off.Note:• When USB input is selected, this does not operate. 3D Y/C Filter (NTSC)Colour systemSignalOnAutoCinema realityPanasonic Auto (4 : 3)Off4 : 3[ AV ]P-NR OffPress to select “Cinema reality”.Press to set On/Off.XGA ModeThis menu is displayed when the input signal is analog (Component/PC).This menu sets three types of XGA signals with 60Hz vertical frequency having different aspect ratios and samplingrates (1,024 × 768 @ 60Hz, 1,280 × 768 @ 60Hz and 1,366 × 768 @ 60Hz). 3D Y/C Filter (NTSC)Colour systemSignalOnAutoXGA ModePanasonic Auto (4 : 3)1024 × 7684 : 3[ AV ]P-NR OffPress to select “XGA Mode”.Press to select “1024×768”, “1280×768”, “1366×768”.Note:• After making this setting, be sure to make each adjustment (such as “Auto Setup”) on the “Position” menu asnecessary.Noise reductionReduces picture noise.3d Y/c Filter (Ntsc)Color SystemSignalOnAuto3 : 2 PulldownPanasonic Auto (4 : 3)OffNormal[ Video ]Noise reduction OffBlock NrMosquito NrOffOffRefresh Rate 100 HzPress to select “Noise reduction”.Press to select “Off”, “Auto”, “Min”, “Mid”, “Max”.Auto: Noise reduction will be automatically selected from “Min”,“Mid” or “Max”.