72Using Web Browser ControlYou can use a Web browser to control the unit and set up a network and password.Before Using Web Browser ControlTo use the Web browser control, the unit and computer setups are required.Unit SetupSet each “Network Setup” setting and make sure to set the “Network control” to “ON”.Computer SetupDisable the proxy server settings and enable JavaScript.(Windows) (Macintosh)Disable proxy server settings1. Display [Internet Properties] window.Click [Start] – [Control Panel] – [Network and Internet]– [Internet Options].2. Click the [Connections] tab and then [LAN Settings].3. Deselect the [Use automatic configuration script] and[Use a proxy server for your LAN] boxes.4. Click [OK].Enable JavaScript1. Display [Internet Properties] window.Click [Start] – [Control Panel] – [Network and Internet]– [Internet Options].2. Set the security level on the [Security] tab to [DefaultLevel]. Alternatively enable [Active scripting] from the[Custom Level] button.Disable proxy server settings1. From the [Safari] menu, click [Preferences].General screen is displayed.2. From the [Advanced] tab, click the [ChangeSettings…] button next to [Proxies]. Click [Proxies]and set up a proxy server.3. Deselect the [Web Proxy] and [Automatic ProxyConfiguration] boxes.4. Click [Apply Now].Enable JavaScript1. Display [Security] of Safari.2. Select [Enable JavaScript] under [Web content].Access from Web Browser1 Activate the Web browser in the personal computer.2 Enter the IP address set by the Display into the URL input field of the Web browser.About the IP address set by the Display, see “Network settings” (page 66).3 Enter your “User name” and “Password”.The factory default settings are user1 (user privileges) oradmin1 (administrator privileges) for the user name andpanasonic for the password.The server 192.168.0.8 at LFV70-00 requires a username and password.Warning: This server is requesting that your username and password besent in an insecure manner (basic authentication without a secureconnection).