Panasonic TH-55LFV70U Operating Instructions Manual

Also see for TH-55LFV70U: Operating instructions Operation instruction Operating instructions

Contents

Panasonic TH-55LFV70U Operating Instructions Manual Manual pdf 16 page image

16ConnectionsBasic format for control dataThe transmission of control data from the computerstarts with a STX signal, followed by the command, theparameters, and lastly an ETX signal in that order. If thereare no parameters, then the parameter signal does notneed to be sent.Start(02h)3-charactercommand (3 bytes)Colon Parameter(s) End(03h)STX C1 C2 C3 P1 P2 P3 P4: P5 ETXNotes:• If multiple commands are transmitted, be sure to waitfor the response for the first command to come from thisunit before sending the next command.• Note that sending a command with ID=”00” does notreturn a response.• For command transmission, be sure to wait at least 700msec before sending a next command.• If an incorrect command is sent by mistake, this unit willsend an “ER401” command back to the computer.• Consult an Authorized Service Center for detailinstructions on command usage.• With the power off, this display responds to PONcommand only.• When the serial ID function (P45) is ON, onlycommands including the same display ID can beoperated. Add AD94, RAD= to the head of theformat. For , put a display ID of 001 to 100, or000, or put a group ID of AAA (for A) to GGG (for G).CommandCommand Parameter Control detailsPON None Power ONPOF None Power OFFAVL *** Volume 000 - 100AMT 0 Audio MUTE OFF1 Audio MUTE ONIMS NoneVD1YP1HM1DV1DV2PC1DL1DP1UD1Input select (toggle)VIDEO IN input (VIDEO)COMPONENT/RGB IN input(Component)HDMI input (HDMI)DVI-D1 IN input (DVI-D1)DVI-D2 IN input (DVI-D2)PC IN input (PC)DIGITAL LINK inputDisplayPort inputUSB inputDAM NoneZOOMFULLNORMZOM2Screen mode select (toggle)Zoom116:94:3Zoom2IR IN / IR OUT Terminals connectionUse a 3.5 mm stereo mini plug to connect from the IR OUT of the First LCD Display to the IR IN of the Second LCDDisplay. The IR signal from the First LCD Display will be sent to the Second LCD Display.First LCD Display Second LCD DisplayThird LCD Display* Stereo mini plug (M3)**At this time, IR receiver of the Second LCD Display will not work.It is possible to daisy-chained by repeating the above connection.