Panasonic TH-55LFV70U Operating Instructions Manual

Also see for TH-55LFV70U: Operating instructions Operation instruction Operating instructions

Contents

Panasonic TH-55LFV70U Operating Instructions Manual Manual pdf 44 page image

44SETUPMPEG Noise reductionReduces block noise and mosquito noise on MPEG videos.MPEG noise reduction OffPress to select “MPEG Noise reduction”.Press to select “Off”, “Min”, “Mid”, “Max”.Signal RangeSwitches the dynamic range according to the input signal from HDMI, DIGITAL LINK, DVI-D or DisplayPort terminal.MPEG noise reduction AutoSignal range Full (0-255)Press to select “Signal range”.Press to select “Video(16-235)”, “Full(0-255)”, “Auto”.Video(16-235): If the input signal is the video range, Example: HDMI terminal output for DVD playerFull(0-255): If the input signal is full range, Example: HDMI terminal output for personal computerAuto: Switches the dynamic range automatically between “Video(16-235)” and “Full(0-255)” according to the input signal.Note:• This function can be set to the HDMI, DisplayPort, and DIGITAL LINK signal.SyncThis function operates only during input from PC IN terminal.Sync AutoPress to select the “Sync”.Press to select “Auto”, “on G” or “on Y”.Setting RGB/PC sync signal[Auto]: The H and V sync or synchronized signal is automatically selected. If both of them have sync, H and V syncwill be selected.[on G]: Uses a synchronized signal on the Video G signal, which is input from the G connector.Setting Component sync signal[Auto]: The H and V sync or synchronized signal is automatically selected. If both of them have sync, H and V syncwill be selected.[on Y]: Uses a synchronized signal on the Video Y signal, which is input from the Y connector.Note:• About RGB signals from “COMPONENT/VIDEO IN” terminal, accepts only the signals with “Sync on G”.