Panasonic TH-55LFV70U Operating Instructions Manual

Also see for TH-55LFV70U: Operating instructions Operation instruction Operating instructions

Contents

Panasonic TH-55LFV70U Operating Instructions Manual Manual pdf 60 page image

60SETUPSet up TIMERSet the program for turning the power On/Off and select the input signal at the specified time. Up to 20 programs can beset.[Setting Example]Program 1, Every Monday, 12:00, Power On, Input: VIDEOSet up timerPresent time SUN 10 : 00ProgramTimer function On1DayPower modeTimeInputMONPower on12 : 00VIDEO1 select2 adjust1 Set the program number.2 To execute the program, set to “On”.The program is disabled when “Off” is set.3 Set the day.The program is executed every day when “Everyday” is set.4 Set the power On/Off.5 Set the time.Pressing “ ” or “ ” button once changes “Time” 1 minute.Pressing “ ” or “ ” button continuously changes “Time” by 15minutes.6 Set the input.Notes:• This function cannot be set unless “PRESENT TIME Setup” is set.• If more than one programs are set for the same time, only the program with the smallest program number is enabled.Control SettingsConfigure the settings for serial communication and remote control operation. Setup 2/2Set up timerDay/Time settings60 secControl SettingsNetwork settingsUSB media player settingsFunction button settingsDisplay orientationOSD position Upper/RightLandscapeMenu display durationMenu transparency 201 Press to display the Setup menu.2 Press to select “Control Settings”.Press the ENTER key to enter Control Settings.Serial control:Sets which terminal to use for input for serial communication.Options: SERIAL IN: SERIAL IN terminalDIGITAL LINK: DIGITAL LINK terminalSerial out:Sets which terminal to use for output for serial communication.Options: SERIAL OUT: SERIAL OUT terminalDIGITAL LINK: DIGITAL LINK terminalControl SettingsSerial controlSerial out SERIAL OUTSERIAL INIR control Built-inIR out IR OUTSerial daisy chain position---Serial response(ID all)Serial ID groupSerial response(group)OffAOffNote:When “DIGITAL LINK” is set to “Serial control” or “Serial out”, the power lamp lights orange when the remotecontrol power is switched “Off” (standby).IR control:Sets which terminal to use for remote control signal output.Options: Built-in: built-in sensorIR IN: IR IN terminalDIGITAL LINK: DIGITAL LINK terminal