29Screensaver (For preventing after-images)Do not display a still picture, especially in 4:3 mode, for any length of time.If the display must remain on, a Screensaver should be used.2/2SetupScreensaverMULTI DISPLAY SetupSetup TIMERPRESENT TIME SetupScreensaverStartFunctionModeSide panelWobblingPeak limitFinish TimeStart TimeWhite bar scrollOff6:1512:30HighOffOffPRESENT TIME 99:99ScreensaverStartFunctionModeSide panelWobblingPeak limitFinish TimeStart TimeWhite bar scrollOff6:1512:30HighOffOffPRESENT TIME 99:99ScreensaverStartFunctionModeSide panelWobblingPeak limitFinish TimeStart TimeWhite bar scrollOn6:1512:30HighOffOffPRESENT TIME 99:99Reversal / Scroll selection2314Press to display the Setup menu.Press to select Screensaver.Press to display Screensaver screen.Press to select Function.Press to select the desired function.White bar scroll Image ReversalWhite bar scroll : The white bar will scroll from left to right.Image Reversal : Negative image will be displayed on the screen.Mode selectionStart setting5When the Mode is set to On, press to selectStart.Press to start Screensaver.The menu screen will disappear and the Screensaver will be activated. To stop theScreensaver under On, press the R button.Press to select Mode.Press to select each mode items.OffInterval : Operates when Periodic Time and Operating Time are setupand those times arrive.Time Designation : Operates when Start Time and Finish Time are setup andthose times arrive.On : Operates when Start is selected and the ACTION ( ) buttonis pressed.