26Digital Zoom1324This displays an enlargement of the designated part of the displayed image.Display the “Operation Guide”.Press to access Digital Zoom.The “Operation Guide” will be displayed.Select the area of the image to be enlarged.Press on the enlargement location to select.Select the magnification required for the enlarged display.Each time this is pressed, the magnification factor changes.This is shown in the image being displayed.Return to normal display (quit Digital Zoom).Press to exit from the Digital Zoom.The cursor will move.VOL buttonMUTE buttonSURROUND buttonOFF TIMER button× 1 × 2 × 3 × 41ExitNotes:• When power goes OFF (including “Off Timer” operation), Digital Zoom terminates.• The Digital Zoom function cannot be selected while in the following operation state:“Multi-viewer” (Picture in Picture, Picture out Picture, Picture and Picture) operation. (see page 21)• While Digital Zoom is in operation, “Adjusting Pos. / Size” cannot be used.• Following signals are not applicable to this menu.1125 / 50p • 60p, 1152 × 864 @60 Hz, 1400 × 1050 @60 Hz, 1600 × 1200 @60Hz, 1920 × 1200 @60 HzDuring Digital Zoom, only the following buttons can be operated.[Remote control] [Unit]VOL buttonINPUT MENU ENTER/+/VOL-/2Exit2POSITION / ACTIONbutton