Panasonic TH-50PF9EK Operating Instructions Manual

Panasonic TH-50PF9EK Operating Instructions Manual Manual pdf 22 page image

22Advanced PIP1235Press to display the Setup menu.Press to select “OSD Language”.Press and hold until the Options menu is displayed.Press to select Advanced PIP.Press to adjust the menu.Off : Sets normal two screen display mode(see page 21).On : Sets Advanced PIP mode.Press to confirm.Press to exit fromOptions menu.46One screen Advanced PIPMain screenSub screenNotes:• Advanced PIP corresponding signal• Sound output is from the picture which is selected in Audio OUT (PIP) (See page 25).• In 2 screen display, the same input mode cannot be selected for the main picture and sub picture.• The main picture and sub picture are processed by different circuits, resulting in a slight difference in the clarity ofthe pictures. There may also be a difference in the picture quality of the sub picture depending on the type of signalsdisplayed on the main picture and depending on the 2-picture display mode.• Due to the small dimensions of the sub pictures, these sub pictures cannot be shown in detail.• Computer screen picture is displayed in a simplified format, and it may not be possible to discern details on them satisfactorily.• Following combinations of two analog signals cannot be displayed simultaneously;Component - Component, Component - PC (RGB), PC (RGB) - Component, PC (RGB) - PC (RGB)• Following signals are not applicable to this menu.1125 / 50p • 60p, 1152 × 864 @60 Hz, 1400 × 1050 @60 Hz, 1600 × 1200 @60Hz, 1920 × 1200 @60 Hz• Refer to each board's operating instruction for DVI, SDI, HDMI's corresponding signals.1/3OptionsOff-timer functionINPUT lockStudio W/BAdvanced PIPDisplay sizeInitial VOL levelMaximum VOL levelInitial INPUTOnscreen displayOffOffOffOffEnableOnOff0OffOff0Sub screen Main screenNTSC, PAL, SECAM (tuner, video)525i, 525p, 625i, 625p, 750/60p, 750/50p, 1125/60i, 1125/50i,1250/50i (Component Video, RGB, DVI, SDI, HDMI)640x480@60Hz, 852x480@60Hz, 1024x768@60Hz,1366x768@60Hz (RGB, DVI, HDMI)1280x768@60Hz (DVI)Press repeatedly.Each time pressingthis button main picture and sub picture will be displayed as above.Note:To use , , , buttons for the screen operations, follow the procedures in the previous page.7(When Advanced PIP is On)