Panasonic TH-50PF9EK Operating Instructions Manual

Panasonic TH-50PF9EK Operating Instructions Manual Manual pdf 19 page image

19Adjusting Pos. /Size1 Press to display the Pos. /Size menu.Press to select Auto Setup / H-Pos / H-Size / V-Pos /V-Size / Dot Clock / Clock Phase / 1:1 Pixel Mode.Press to adjust Pos. / Size.Press to exit from adjust mode.32Notes:• Adjustment details are memorized separately for different input signal formats(Adjustments for component signals are memorized for 525 (480) / 60i · 60p,625 (575) / 50i · 50p, 1125 (1080) / 60i · 50i · 60p · 50p · 24p · 25p · 30p ·24sF, 1250 (1080) / 50i, 750 (720) / 60p · 50p each, and RGB/PC/Digitalsignals are memorized for each frequency.)• If a “Cue” or “Rew” signal from a VCR or DVD player is received, the pictureposition will shift up or down. This picture position movement cannot becontrolled by the Picture Pos./Size function.• If adjusting the Picture V-Pos/V-Size in Panasonic Auto with 16:9 mode, theadjustment is not memorized. When exiting the mode, the screen will returnto a former adjustment.While the Pos. / Size display is active, if either the N button on the remote control is pressed at any time or the ACTION( ) button is pressed during “Normalise”, then all adjustment values are returned to the factory settings.Helpful Hint ( / Normalise Normalisation)4During “Video (S Video)”, “Digital”,“SDI” and “HDMI” input signal.0NormalNormaliseAuto SetupPos. /SizeV-Pos0H-PosV-SizeDot ClockH-SizeClock Phase1:1 Pixel Mode Off0000During “Component”, “RGB” and“PC” input signal.000NormalNormalisePos. /SizeV-PosH-Pos0V-SizeH-Size1:1 Pixel Mode OffAuto Setup