Panasonic TH-50PF9EK Operating Instructions Manual

Panasonic TH-50PF9EK Operating Instructions Manual Manual pdf 12 page image

12Power On / OffPC16:9Connecting the plug to the Wall OutletNote:Main plug types vary between countries. The power plug shownat right may, therefore, not be the type fitted to your set.Press the Power switch on the Plasma Display to turn the seton: Power-On.Power Indicator: GreenExample: The screen below is displayed for a while after thePlasma Display is turned on (setting condition is anexample).When the Power is turned on for the firsttime, the Language selection screen isdisplayed.From the second time on, languageselection can be done from the setupmenu. (see page 13)Select the desired language using theor button and press the ACTION ( )button.From the second time on, the belowscreen is displayed for a while (settingcondition is an example).Press the button on the remote control to turn the Plasma Display off.Power Indicator: Red (standby)Press the button on the remote control to turn the Plasma Display on.Power Indicator: GreenTurn the power to the Plasma Display off by pressing the switch on theunit, when the Plasma Display is on or in standby mode.Note:During operation of the power management function, the power indicator turnsorange in the power off state.Connecting the AC cord plug to the Plasma Display.Fix the AC cord plug securely to the PlasmaDisplay with the clamper. (see page 8)ItalianoEspañolENGLISH (US)РусскийEnglish (UK)DeutschFrançaisOSD LanguageSetSelectINPUT MENU ENTER/+ /VOL-/Power IndicatorRemote ControlSensor