Panasonic TH-50LFC70U Operating Instructions Manual

Also see for TH-50LFC70E: Operating instructions

Contents

Panasonic TH-50LFC70U Operating Instructions Manual Manual pdf 60 page image

Options 2/3Off-timer functionInitial Power Mode NormalOffOffOffEnableSerial ID0ID selectDisplay sizeStudio W/BStudio GainLAN Control ProtocolRS-232C/LAN Information TimingOffProtocol 1• The serial number of this device is displayed when “Display Serial Number” is selected in step 3.Options 1/3Onscreen displayWeekly Command TimerAudio input selectInput SearchInitial input OffOffOff 0Off 0OnInitial VOL levelMaximum VOL levelInput lockButton lockRemocon User levelOffOffOptions 3/3Slot powerDVI-D Power management mode Standard modePower On Screen Delay OffOffManualOffAll AspectOffClock DisplayAuto SetupOnPower On Message (No activity power off)Power On Message (Power management) On58Options AdjustmentsItem AdjustmentsWeekly Command Timer Sets Weekly Command Timer. (see page 61)Audio input select Set up the sound when an image input is selected. (see page 63)Input Search Set auto input switching for when there is no signal. (see page 64)Onscreen displayOn: Displays all the following on screen.• Power on display• Input signal switch display• No signal display• Mute and the remaining time of off-timer after was pressed.Off: Hides all the items above from view.Initial inputAdjusts the input signal when the unit is turned on.Off HDMI1 HDMI2 SLOT INPUT*1 VIDEO COMPONENT* 2 PC DVIDIGITAL LINK Miracast(TM) Panasonic APPLICATION MEMORY VIEWER*1 “SLOT INPUT” is displayed when an optional Terminal Board is installed.When a Terminal Board with dual input terminals is installed, “SLOT INPUT A” and “SLOT INPUTB” are displayed.*2 “COMPONENT” may be displayed as “RGB” depending on the setting of “Component/RGB-in select”. (see page 54)Notes:• Only the adjusted signal is displayed. (see page 21)• This menu is available only when “Input lock” is “Off”.Initial VOL levelPress button to adjust the volume when the unit is turned on.Off OnOff: Sets normal volume.On: Sets your preferred volume.Notes:• When “Maximum VOL level” is “On”, the volume can only be adjusted between 0 and your maximum range.• You can hear the changed volume regardless of your volume setting before opening the options menuif you adjust the volume when “Initial VOL level” is “On” and cursor is on the menu.Maximum VOL levelPress button to adjust the maximum volume.Off OnOff: Sets auto maximum volume.On: Sets your preferred maximum volume.Notes:• If the “Maximum VOL level” is set lower than the “Initial VOL level”, the “Initial VOL level” automaticallybecomes the same as the “Maximum VOL level”.• The volume display can go up to 63 regardless of the settings.• You can hear the changed volume regardless of your volume setting before opening the options menuif you adjust the volume when “Maximum VOL level” is “On” and cursor is on the menu.1 Press to display the Setup menu.5 Press to exit from Options menu.243Press to select “OSD Language”.Press for more than 3 seconds.Press to select “Options”.Press to display the Options menu.Press to select your preferred menu.Press to adjust the menu.OptionsDisplay Serial NumberShippingThe remote control is used for all the Options menu operations. Unit buttons cannot be used for this operation.