Panasonic TH-50LFC70U Operating Instructions Manual

Also see for TH-50LFC70E: Operating instructions

Contents

Panasonic TH-50LFC70U Operating Instructions Manual Manual pdf 53 page image

51Function Button SettingsSet the functions that operates when is pressed.Function Button SettingsFunction Button 1Function Button 2 INPUT (MEMORY VIEWER)OnFunction Button GuideINPUT (Miracast(TM))Select “Function Button Settings” in “Setup” menu andpress button.• Function Button 1, Function Button 2The following functions are set to the FUNCTION button.INPUT (SLOT)* - INPUT (MEMORY VIEWER)Simply press to select the input.* “INPUT (SLOT)” is displayed when an optional Terminal Board is installed.When a Terminal Board with dual input terminals is installed, “INPUT (SLOT A)” and “INPUT (SLOT B)” aredisplayed.• Function Button GuideThe function display setting for the FUNCTION button is congured.On: Press the FUNCTION button to display the function list of the button.Off: The function list is not displayed.ECO Mode settings / Signal / On/Off Timer Settings / MULTI PIP SettingsScrolling barActivates the “Scrolling bar only” screensaver.After 15 minutes, the display enters standby mode.Note:Factory settings are as follows.FUNCTION1 button: INPUT (Miracast(TM))FUNCTION2 button: INPUT (MEMORY VIEWER)The menu is displayed. (Example: ECO Mode settings)Pressing the FUNCTION button clears the menu.ECO Mode settingsECO ModePower save OffOffOffDisablePC Power managementOffHDMI1 Power managementOffHDMI2 Power managementDVI-D Power managementNo signal power offCustomThe operation starts.Function1:INPUT (Miracast(TM)) 2:INPUT (MEMORY VIEWER)To exit this mode, press button.Network Settings“Network Settings” menu is displayed.Note:For the network function, refer to “Operating Instructions, Network Operations” and the instruction manual of “WirelessManager” in use.Multi-LiveSwitch to the Multi-Live mode when using the“Wireless Manager”.AV MuteMutes the audio and video. To exit this mode, press anybutton.MULTI PIPPress to turn MULTI PIP On/Off.