Panasonic TH-50LFC70U Operating Instructions Manual

Also see for TH-50LFC70E: Operating instructions

Contents

Panasonic TH-50LFC70U Operating Instructions Manual Manual pdf 23 page image

21Selecting the input signalPress to select the input signal to be played back from the equipment which has beenconnected to the Display.Alternatively you can press , press to select the input and press .INPUTHDMI1HDMI2SLOT INPUTVIDEOCOMPONENTPCDVIDIGITAL LINKMiracast(TM)Panasonic APPLICATIONMEMORY VIEWERHDMI input in HDMI 1 terminalHDMI input in HDMI 2 terminalInput signal in a Terminal Board* 1Composite video input in VIDEO terminalComponent/RGB input in COMPONENT/RGB IN terminal* 2Computer's signal input in PC IN terminalDVI-D input in DVI-D IN terminalDIGITAL LINK input in DIGITAL LINK terminalSelect this input when using the Miracast function. ( see page 33)Select this input when using “Wireless Manager” via wired/wireless LAN.Select this input when using the Memory Viewer function. ( see page 30)*1 “SLOT INPUT” appears when an optional Terminal Board is connected.When a Terminal Board with dual input terminals is connected, “SLOT INPUT A” and “SLOT INPUT B” will appear.When a Terminal Board incompatible with the Display is installed, “Non-Compatible Function Board” is displayed.*2 “COMPONENT” may be displayed as “RGB” depending on the setting of “Component/RGB-in select”.(see page 54)Notes:• Selecting is also possible by pressing the INPUT buttonon the unit.• Outputs the sound as set in “Audio input select” in theOptions menu. (see page 63)• Select to match the signals from the source connectedto the component/RGB input terminals. (see page 54)• Image retention (image lag) may occur on the LCDdisplay panel when a still picture is kept on the panel foran extended period. To prevent such a problem, usingthe screensaver is recommended. (see page 47)• The connection of the Wireless Manager is interrupted ifthe input is switched from Panasonic APPLICATION toMiracast(TM) or MEMORY VIEWER.The connection of Miracast is interrupted if the input isswitched from Miracast(TM) to Panasonic APPLICATIONor MEMORY VIEWER.Please check the setting again after switching the input.INPUTMENUVOLENTER/+ /- /