Panasonic TH-50LFC70U Operating Instructions Manual

Also see for TH-50LFC70E: Operating instructions

Contents

Panasonic TH-50LFC70U Operating Instructions Manual Manual pdf 19 page image

17The image being reproduced on the display including the image input from video equipment can be displayed onanother sub monitor.To use the function, set “Monitor Out” to “On” in “Setup”. (see page 52)Note: Setting it to “On” will adjust the “Picture” menu values to the standard values.Computer, DVD player andother video equipmentUSB memory(To be viewed in MemoryViewer)Input signals that can be outputInput signal Output signalHDMI input signal (HDMI 1, HDMI 2)HDCP (copy protection) not supported1,920 x 1,080@50 Hz or1,920 x 1,080@60 HzDVI input signal (DVI-D IN)HDCP (copy protection) not supported1,920 x 1,080@50 Hz or1,920 x 1,080@60 HzPC input signal (PC IN)When “Component/RGB-in select” is set to“RGB”1,920 x 1,080@50 Hz or1,920 x 1,080@60 HzMemory Viewer screen (MEMORY VIEWER) 1,920 x 1,080@60 HzNotes:• The aspect ratio of the output signal is changed so that it can be shown on the screen.• The following input signals cannot be output.Component input (COMPONENT/RGB IN)Composite video input (VIDEO)Miracast image (Miracast(TM))Wireless Manager (Panasonic APPLICATION)Pin Layout and Signal Names of Monitor Out Terminal (Mini-D-sub 15P)167839451015 14 13 12 112Sub monitor(Female)(Male)Mini D-sub 15p cable(Commercially available)PC input terminalConnectionsPC OUT connectionPin No. Signal Name Pin No. Signal Name Pin No. Signal Name1 R 6 GND (Ground) 11 NC (not connected)2 G 7 GND (Ground) 12 NC (not connected)3 B 8 GND (Ground) 13 HD4 NC (not connected) 9 +5 V DC 14 VD5 GND (Ground) 10 GND (Ground) 15 NC (not connected)