When using without authentication, leave the passwordblank.Should any of the following points apply, a warningmessage will be displayed.1. When the password does not satisfy therecommended conditions.2. When the default password has not been changed3. When the new password is the same as the old one4. No password (blank)Notes● It is recommended that do not set the same passwordas the current password or the same value as thefactory setting as the New password.● For PJLink specifications, visit the Japan BusinessMachine and Information System IndustriesAssociation (JBMIA) website:http://pjlink.jbmia.or.jp/english/index.html● No member of the Panasonic Corporation or itsaffiliate companies will ever ask directly for yourpasswordnewNever divulge your password should you ever receivesuch a request.Early Warning SoftwareThis unit supports “Early Warning Software” whichmonitors the status of devices (projectors or flat-paneldisplays) connected to an Intranet, device failures arereported and the detection of predicted abnormalityallows advance warning to be given.The maximum number of devices that can be registeredfor monitoring depends on the type of license. Up to2048 devices can be registered and used free for 90days after the PC installation has been completed.● For more details, visit the following website:https://panasonic.net/cns/prodisplays/products/swa100/index.htmlNote● When using this software, set “Eco mode” to“Normal”. ( See page 31)Multi Monitoring & Control SoftwareThis unit supports “Multi Monitoring & Control Software”which monitors and controls devices (projectors or flat-panel displays) connected to an intranet.For details, see the following website.https://panasonic.net/cns/prodisplays/download/software/index.htmlNote● When using this software, set “Eco mode” to“Normal”. ( See page 31)English38