Panasonic TH-49LFV8U Operating Instructions Manual

Also see for TH-49LFV8U: Operating instructions

Panasonic TH-49LFV8U Operating Instructions Manual Manual pdf 31 page image

Example: 5 x 5 screen matrix (25 Displays)H monitors = 5 DisplaysV monitors = 5 Displays1 26 73 48 951011 12 13 14 1516 17 18 19 2021 22 23 24 25H monitorsV monitorsPositionFrame comp.Turn the frame compensation function on or off. Whenselected {On}, the displayed image will be adjusted tocompensate for the width of the Display bezel to give amore accurate image.General SettingsMenu languageMonitor IDEco modeAuto searchClockSchedulingSleep timerLocal KB lockRC lockPixel shiftPictureSoundTilingGeneral settingsNetwork settingsMenu languageChoose language for the OSD menus.Monitor IDSet the ID number for SERIAL control of the Display.Each display must have a unique ID number whenmultiple sets are connected. Monitor ID number range isbetween 1 to 255. The default setting is 1.Eco modeSet this Display to reduce power consumptionautomatically.Notes● Set this mode to “Normal” when using the serial andPJLink control.● Set this mode to “Normal” when using Early Warning,Multi Monitoring & Control, or the Video WallManager.Auto searchChoose to allow this device to detect and displayavailable signal sources automatically.Note● When selecting “USB auto play” with failover, placethe movie file and photo file in a folder named“autoplay” created in the top level of the USBmemory.ClockSet current date and time for the internal clock.SchedulingThis function allows up to 7 different scheduledactivation intervals to be programmed for this Display.You can set:• The input source that will be used by the Display foreach scheduled activation period.• The time the Display will come on and go off.• The days the Display will activate over one week.Notes● We recommend that the current date and time be setin {Clock} before using this function.● After changing the {Clock} option in the{General Settings} menu, you need to set{Scheduling} again.Menu languageMonitor IDEco modeAuto searchClockSchedulingSleep timerLocal KB lockRC lockPixel shiftPictureSoundTilingGeneral settingsNetwork settings1. Seven schedules can be set. Go to Status andchoose On.StatusSourceOn timeOff timeRepeat modesPlaylist settingSchedule 1Schedule 2Schedule 3Schedule 4Schedule 5Schedule 6Schedule 7OffOn2. Go to Source and choose input source. If{Source}  {USB} is chosen. You need to setplaylist.31English