Panasonic TH-49LFV8U Operating Instructions Manual

Also see for TH-49LFV8U: Operating instructions

Panasonic TH-49LFV8U Operating Instructions Manual Manual pdf 11 page image

Remote Control Batteries1. Pull and hold the hook, then open the battery cover.2. Insert batteries - note correct polarity (+ and -).AAA/R03/UM4 type3. Replace the cover.Helpful Hint● When the remote control is in frequent use, replacethe old batteries with Alkaline ones which have longerlife.Precautions for battery useIncorrect installation of the batteries can cause batteryleakage and corrosion that will damage the remotecontrol device.Discarded batteries should be dealt with in anenvironmentally-friendly manner.Observe the following precaution:1. Batteries must always be replaced as a pair. Alwaysuse new batteries when replacing the old set.2. Do not combine a used battery with a new one.3. Do not mix battery types (example: “Zinc Carbon”with “Alkaline”)4. Do not attempt to charge, short-circuit, disassemble,heat or burn used batteries.5. Batteries should be replaced when the remotecontrol works sporadically or fails to operate theDisplay.6. Do not burn or break batteries open.7. Do not leave batteries in direct sunlight, nor exposethem to heat from radiators, stoves, or other sourcesof heat.VESA MountingTo mount this Display on a wall, you will need astandard wall-mounting kit (commercially available). Werecommend using a mounting interface that complieswith the TUV-GS and/or UL1678 standard in NorthAmerica.TH-49LFV8TH-55LFV8Protective SheetVESA Grid Tabletop standTableProtective SheetVESA Grid Tabletop standTable1. Lay a protective sheet on a flat table. The wrappingthat was around the display in the package is good.Place the display on the sheet, screen down, so asnot to scratch the screen face.2. Ensure you have all the accessories for mountingthe Display (wall mount, ceiling mount, table stand,etc).3. Follow the instructions that come with the basemounting kit. Failure to follow the correct mountingprocedure could result in damage to the equipmentor personal injury. The product warranty does notcover damage caused by improper installation.4. Use M6 mounting screws for the wall-mountingwhich are at least 10mm longer than the thicknessof the mounting bracket. Make sure the screws aretightened securely.Protective SheetProtective SheetTabletop standTabletop standVESA GridVESA GridTableTable11English