Positioning/Video connectionsENGLISHRQT80924 4Simple setupPositioningUse only supplied speakers• Using other speakers can damage the unit and sound qualitywill be negatively affected.• Set the speakers up on an even surface to prevent them fromfalling. Take proper precautions to prevent the speakers fromfalling if you cannot set them up on an even surface.Caution• Use the speakers only with the recommendedsystem. Failure to do so may lead to damage to theamplifier and/or the speakers, and may result in therisk of fire. Consult a qualified service person ifdamage has occurred or if you experience a suddenchange in performance.• Do not attach these speakers to walls or ceilings.Positioning for best effectHow you set up your speakers can affect the bass and the soundfield. Note the following points.• Place speakers on flat secure bases.• Placing speakers too close to floors, walls, and corners canresult in excessive bass. Cover walls and windows with a thickcurtain.• Keep your speakers at least 10 mm away from the system forproper ventilation.Notes on speaker use• You can damage your speakers and shorten their useful life ifyou play sound at high levels over extended periods.• Reduce the volume in the following cases to avoid damage.– When playing distorted sound.– When the speakers emit strange noise (howling) from amicrophone or record player, noise from FM broadcasts, orcontinuous signals from an oscillator, test disc, or electronicinstrument.– When adjusting the sound quality.– When turning the unit on or off.If irregular coloring occurs on your televisionThese speakers are designed to be used close to a television,but the picture may be affected with some televisions and set-upcombinations.If this occurs, turn the television off for about 30 minutes.The television’s demagnetizing function should correct theproblem. If it persists, move the speakers further away from thetelevision.STEP1Place the speaker so that the super tweeter is on the outside.Super tweeterNoteYou cannot take the front net off the speakers.Video connectionsSTEP277777 Television with COMPONENT VIDEO IN terminalsCOMPONENTVIDEO OUTVIDEOOUTP BP RYS VIDEOOUTCOMPONENTVIDEO INPRPBYTelevision(not included)Back of themain unitVideo cables(not included)Video cable• Do not connect the unit through a video cassette recorderDue to copy guard protection, the picture may not be displayedcorrectly.• Turn the television off before connecting, and refer to thetelevision’s operating instructions.77777 Television with a VIDEO IN terminalCOMPONENTVIDEO OUTVIDEOOUTPBPRYS VIDEOOUTVIDEO INVideo cable(included) Television(not included)Back of themain unit77777 Television with an S VIDEO IN terminalCOMPONENTVIDEO OUTVIDEOOUTPBPRYS VIDEOOUTS-VIDEOINS-video cable(not included)Television(not included)Back of themain unitS VIDEO OUT terminalThe S VIDEO terminal achieves a more vivid picture than theVIDEO OUT terminal by separating the chrominance (C) andluminance (Y) signals. (Actual results depend on thetelevision.)COMPONENT VIDEO OUT terminalsThese terminals can be used for either interlace or progressive outputand provide a purer picture than the S VIDEO OUT terminal.Connection using these terminals outputs the color difference signals(P B/PR ) and luminance signal (Y) separately in order to achieve highfidelity in reproducing colors.• The description of the component video input terminals dependson the television or monitor (e.g. Y/P B/PR,Y/B-Y/R-Y, Y/CB /C R).Connect to terminals of the same color.To enjoy progressive videoConnect to the component video input terminals on a 480p (or525p) or 576p (or 625p) compatible television. (Video will not bedisplayed correctly if connected to an incompatible television.)