SpecificationsRQT809230ENGLISH30SpecificationsAMPLIFIER SECTIONRMS Output Power Stereo mode both channels driven: 10 %Total Harmonic Distortion1 kHz Front Ch 110 W per channel (4 Ω)Total RMS Stereo mode power 220 WPMPO output power 2400 WFM/AM TUNER, TERMINALS SECTIONPreset station FM 15 stationsAM 15 stationsFrequency Modulation (FM)Frequency range 87.50 – 108.00 MHz (50 kHz step)Sensitivity 2.5 μV (IHF)S/N 26dB 2.2 μVAntenna terminals 75 Ω (unbalanced)Amplitude Modulation (AM)Frequency range 522 – 1629 kHz (9 kHz step)520 – 1630 kHz (10 kHz step)AM Sensitivity S/N 20dB at 1000 kHz 560 μV/mAudio performance (Amplifier)Input sensitivity/Input impedanceAux 250 mV, 12 kΩDigital audio outputOptical digital output Optical terminalPhone jackTerminal Stereo, 3.5 mm jackMic jackSensitivity 0.7 mV, 600 ΩTerminal Mono, 6.3 mm jack (2 system)CASSETTE DECK SECTIONType Auto-ReverseTrack system 4-Track, 2 ChannelHeadsRecord/playback Solid permalloy headErasure Double gap ferrite headMotor DC servo motorRecording system AC bias 100 kHzErasing system AC erase 100 kHzTape speed 4.8 cm/sOverall frequency response (+3, -6 dB) at DECK OUTNormal 35 Hz –14 kHzS/N ratio 50 dB (A weighted)Wow and flutter 0.18% (WRMS)Fast forward and rewind time Approx. 120 seconds withC-60 cassette tapeDISC SECTIONDisc played (8 cm or 12 cm)(1) DVD (DVD-Video)(2) DVD-RAM (DVD-VR, JPEG 4, 5 )(3) DVD-R/RW (DVD-Video)+R/RW (Video)(4) CD, CD-R/RW [CD-DA, Video CD, SVCD 1, MP3 2, 5 ,WMA 3, 5 , JPEG 4, 5 , HighMAT Level 2 (Audioand Image)]1 Conforming to IEC621072 Compatible compression rate: between 32 kbps and 320 kbps3 Compatible compression rate: between 48 kbps and 320 kbps4 Exif Ver 2.1 JPEG Baseline filesPicture resolution: between 320 x 240 and 6144 x 4096 pixels(Sub sampling is 4:2:2 or 4:2:0)5 The total combined maximum number of recognizable audio,picture and movie contents and groups: 4000 audio, picture andmovie contents and 400 groups.Pick upWavelengthCD 785 nmDVD 662 nmAudio output (Disc)Number of channels (FL, FR), 2 ch (stereo)VIDEO SECTIONVideo system PAL625/50, PAL525/60, NTSCComposite video outputOutput level 1 Vp-p (75 Ω)Terminal Pin jack (1 system)S-video outputY output level 1 Vp-p (75 Ω)C output level 0.3 Vp-p (75 Ω) (PAL)0.286 Vp-p (75 Ω) (NTSC)Terminal S terminal (1 system)Component video output[NTSC: 525 (480)p/525 (480)i, PAL: 625 (576)p/625 (576)i]Y output level 1 Vp-p (75 Ω)PB output level 0.7 Vp-p (75 Ω)PR output level 0.7 Vp-p (75 Ω)Terminal Pin jack (Y : green, PB : blue, PR : red) (1 system)SPEAKER SECTIONType 3 way, 3 speaker system (Bass reflex)Speaker unit(s) Impedance 4 Ω1. Woofer 16 cm cone type2. Tweeter 6 cm cone type3. Super tweeter Piezo typeInput power (IEC) 110 W (Max)Output sound pressure 84 dB/W (1.0 m)Cross over frequency 5 kHz, 10 kHzFrequency range 39 Hz–21 kHz (-16 dB)52 Hz–20 kHz (-10 dB)Dimensions (WxHxD) 227 x 344 x 234 mmMass 3.3 kgGENERALPower supplyFor the Middle East and South Africa AC 220–240V, 50/60 HzFor others AC 110–127V/220–240V, 50/60 HzPower consumption 193 WDimensions (WxHxD) 250 x 364 x 330 mmMass 8 kgOperating temperature range +5°C to +35°COperating humidity range 5% to 90% RH (no condensation)Power consumption in standby mode 0.9 W (approximate)Note:1. Specifications are subject to change without notice.Mass and dimensions are approximate.2. Total harmonic distortion is measured by the digital spectrumanalyzer.