Discs — Basic playRQT809210ENGLISHDiscs — Basic play10Skip/Search/Slow-motion play• To skip: Press [g, REW/ 44444] or [f, 33333/FF].• To search: Hold down [g, REW/44444] or [f, 33333/FF] during play.• To play in slow-motion: Hold down [g, REW/44444] or [f, 33333/FF] during pause.• VCD Slow motion play is for forward direction only.• Search/slow motion play speed increases up to 5 steps.3 Press [1]–[5] to playthe disc.You can also press[:, DVD/CD] if the currentdisc is your desired disc.Press [DISC CHANGE c] andthen [1]–[5].Press [DISC CHANGE c] again toclose the tray.• You can also remove a disc whileanother is playing.• If you select a disc which is beingplayed, play stops and the trayopens.:, DVD/CDChange a discin another tray1 Press [OPEN/CLOSE c] to open the tray.The unit comes on.• To load discs in other trays, press [1]–[5] to select the tray and press[OPEN/CLOSE c] to open the tray.• You can load up to 5 discs (one per tray).• Load double-sided discs so the label for the side you want to play is facing up.• RAM Remove the disc from its cartridge before use.Do not pull or push the tray with your hand.2 Press [OPEN/CLOSE c] to close the tray.Note• Discs continue to rotate while menus are displayed. Press [L] when you finish to preserve the unit’s motor and your television screen.• Total title number may not be displayed properly on +R/+RW.Check the disc locationPress [DISC CHECK] during play.Press again to close the trays.• To check the location of the 12 cm discs.• If a disc is being played, the corresponding tray will not open.• Do not remove or insert disc(s) during a disc check.• Do not pull out the trays during a disc check.StopPress [L, STOP] during play.The position is memorized while“RESUME” is on the display.• Press [:, DVD/CD] to resume.• Press [L, STOP] again to clearthe position.