RQT567119TimerC-RESET FM MODE BP CD PLAYMODES.VIRTUALIZERAUTO SCANCLOCKTIMERH.E.S. EQTUNERTAPE CD1 2 34 5 67 9 0810SLEEPPGM CLEARTIMER FADER DISPLAYPLAYREC REW FFPLAY EQ ONSLEEPFADEREQ ONSLEEPFADERREPLAYEQ ONSLEEPFADERREPLAY PLAY EQ ONSLEEPFADEREQ ONALL1 -1 REC STRECSLEEPFADERREPLAY PLAY EQ ONSLEEPFADERPLAY EQ ONSLEEPFADEREQ ONSLEEPFADERREPLAYPLAY RECUsing the TimerRemote control onlyYou can set the timer to come on at a certain time to wakeyou up (play timer) or record a radio station (record timer).Preparations:Turn the unit on and set the clock. ( page 9).•For play timer, prepare the music source (tape/CD/radio) for listening, and set the volume.•For record timer, check the cassette’s erasure preventiontab ( page 16: A ) and load the cassette with the side forrecording facing up. Tune to the radio station ( page 13 to14), and set the volume.Setting the start and finish timesPress [CLOCK/TIMER] to select the desiredtimer function.Each time you press the button:CLOCKOriginal display OFF RECOFF PLAYON RECON PLAYON PLAY: to set the play timerON REC: to set the record timerProceed to step before these indicators stop flash-ing (about 10 seconds).Press [REW/–/ ] or [ /+/FF] to set thestart time.Press [CLOCK/TIMER].Press [REW/–/ ] or [ /+/FF] to set thefinish time.Press [CLOCK/TIMER].The start and finish times are now set.Turning the timer onPress [ PLAY/REC] to display the timerindicator.Each time you press the button:PLAYAYA no display (off)RECPLAY: to turn the play timer onREC: to turn the record timer on(The indicator doesn't appear if the start and finish timeshaven't been set.)“E” appears if the clock hasn't been set.Press [ ] to turn the unit off.The unit must be off for timer to operate.The record timer comes on about 30 seconds earlierthan the set time.To cancel the timerPress [ PLAY/REC] when the unit is on to clear the timerindicators from the display.(The timer comes on at the set time everyday if the timer is on).(Continued on next page)