53Chapter4 AdjustmentsandSettingsforRecordingAdjustments and Settings for 3D RecordingSwitching the LCD Monitor/Viewfinder ScreenEquipped with two lenses, this camera shoots and recordsthe image from the left lens (L) and that from the right lens(R) separately.You can select the image to be displayed on the LCDmonitor and in the viewfinder with the LCD/EVF button.The following LCD/EVF modes can be switched over eachtime you press the LCD/EVF button.•NORMAL:Displays the left-lens (L) image only. This is the normaldisplay mode automatically set when the camera isturned on or during playback.•MIX:Displays a mixed image, with the images from the leftlens (L) and the right lens (R) superimposed.•RIMAGE:Displays the right-lens (R) image only. This mode isused for 3D FINE operation.•SIDEbySIDE:Displays the left-lens (L) image and the right-lens (R)image side by side on the same screen.LCD/EVFbutton• The selected LCD/EVF mode is displayed on the screen.Refer to [21 LCD/EVF mode display] in [Screen displays](page 69).• The images selectable with the LCD/EVF button can bechanged with the menu option LCD/EVF in the SW MODEscreen.MIX: NORMAL and MIX modes selectableMIX/R: NORMAL, MIX and R IMAGE modes selectableALL: NORMAL, MIX, R IMAGE and SIDE by SIDEmodes selectable NOTEThe LCD/EVF button is disabled in 2D LL recording mode.Setting 3D Recording ModeYou can select the 3D recording mode with the 3D MODEselector switch according to the distance of your subject.•NEAR:for shooting a subject at a short distance.•NORMAL:Normally set to this mode (default setting). It allowssmooth zooming operation.•EXTRA:for shooting in telephoto mode. The variable range ofzooming becomes coarse with this mode.3DMODEselectorswitch3D MODEselectorswitchConvergencepoint adjustmentrange*1Variablerange ofzoomingMinimumobjectdistance*1NEAR 1.1 m – 3.4 m(C00 – C69) Z00 – Z80 0.4 mNORMAL 1.7 m – ∞ m(C31 – C99) Z00 – Z80 0.4 mEXTRA 1.7 m – ∞ m(C31 – C99) Z00 – Z99 0.9 m*1 The convergence point adjustment range and theminimum object distance are guides for the distancebetween the front of the camera and the subject. NOTEThe 3D MODE selector switch is disabled in 2D LL recordingmode. The variable range of zooming is fixed to Z00 to Z99.
