4Chapter3 RecordingandPlaybackNormal and Variable Speed PlaybackNormal speed playbackPress the PLAY/PAUSE button to view playback on the LCDmonitor and in the viewfinder in color. Connecting a colorvideo monitor to the HD SDI MONITOR OUT, HD SDI OUT1(L)/2(R) or HDMI connector will enable playback of colorvideo.The PLAY/PAUSE button can be used to pause playback.• During normal playback, 3D display mode is available.(3D recording mode)Fast-forward/fast-reverse playbackThe FF and REW buttons provide 32× and 4× fastplaybacks and fast reverse playbacks. In stop mode, thisfunction will play back video at 32× speed and in playbackmode, it will play back video at 4× speed.• Only 2D display mode is available during fast-forwardand fast-reverse playback.Clip cue upWhen playback is paused, the FF button locates thebeginning of the next clip while staying in pause mode.When playback is paused, the REW button locates thebeginning of the current clip while staying in pause mode. NOTE• It may take some time to load clip data if playback is startedor a thumbnail screen is opened right after removing orinserting a P2 card or turning the power on. The thumbnailscreen displays UPDATING at such times.• To play back a clip in a different SYSTEM MODE, adjustthe SYSTEM MODE to the clip to reset the camera beforeplayback.• Playback of the audio channels CH5 to CH8 recorded onanother device is not possible.• For information on the output connectors and video outputformats depending on the settings, refer to [Selecting VideoOutput] (page 44).
