Maintenance Console Location4.11 [2-7-1] Class of Service—COS SettingsProgramming Manual References6.1 [4-1-1] Wired Extension—Extension Settings—Main— COS6.10 [4-2-1] Portable Station—Extension Settings—Main— COSFeature Guide References2.2.1 Class of Service (COS)Group Forward SetEnables setting call forwarding for calls to an incoming call distribution group.Value RangeDisable: An extension cannot set call forwarding for any group.Enable-All: An extension can set call forwarding for all groups.Enable-Group: An extension can only set call forwarding for the group to which the extension belongs.Maintenance Console Location4.11 [2-7-1] Class of Service—COS SettingsProgramming Manual References5.14 [3-5-1] Incoming Call Distribution Group—Group Settings—Member List6.1 [4-1-1] Wired Extension—Extension Settings—Main— COS6.10 [4-2-1] Portable Station—Extension Settings—Main— COSFeature Guide References1.3.1.2 Call Forwarding (FWD)Programming Mode LevelSpecifies the level of authorisation for performing PT programming.Value RangeDisable: A PT user cannot perform any programming.PROG Only: A PT user can perform only personal programming.PROG and PROG **/*#: A PT user can perform both personal and system programming.Maintenance Console Location4.11 [2-7-1] Class of Service—COS SettingsProgramming Manual References6.1 [4-1-1] Wired Extension—Extension Settings—Main— COSPC Programming Manual 4354.11 [2-7-1] Class of Service—COS Settings
