3.48 [1-2] Portable StationVarious portable station (PS) settings can be programmed. A maximum of 28 (with the KX-TDA30), 128 (withthe KX-TDA100/KX-TDA200), 256 (with the KX-TDA600) or 512 (with the KX-TDA600 with EMEC cardinstalled) PSs can be registered.Information on 32 PSs is displayed at a time. To display other PSs, click the applicable tab.PS Registration and De-registrationA PS must be registered to the PBX by programming both the PBX and PS before it can be used. Programminginstructions of the PBX are given below; programming instructions of the PS are found in the InstallationManual.It is possible to de-register the PS later.RegistrationFollow the steps below to register the PS.1. Click Registration.A dialogue box will appear. Non-registered (available) extension numbers are displayed on the left.2. Highlight numbers and click the right arrow to select them for registration. Click Next.A screen will appear with information on the current PS extension number and index number forprogramming.3. Register the relevant PS.For details, refer to the Installation Manual.KX-TDA30:Registering DECT PS ® 2.7.7 Connecting a Cell Station to the PBXRegistering 2.4 GHz PS ® 2.8.7 Connecting a Cell Station to the PBXRegistering DECT 6.0 PS ® 2.9.7 Connecting a Cell Station to the PBXKX-TDA100/KX-TDA200:Registering DECT PS ® 2.8.7 Connecting a Cell Station to the PBXRegistering 2.4 GHz PS ® 2.9.7 Connecting a Cell Station to the PBXRegistering DECT 6.0 PS ® 2.10.7 Connecting a Cell Station to the PBXKX-TDA600:Registering DECT PS ® 2.10.7 Connecting a Cell Station to the PBXRegistering 2.4 GHz PS ® 2.11.7 Connecting a Cell Station to the PBXRegistering DECT 6.0 PS ® 2.12.7 Connecting a Cell Station to the PBX4. Click Next.• If the PS registration is still in progress, the dialogue box will show "Waiting for portable station toregister…". Click OK.• If the registration is successful, the dialogue box will show "Registration Succeed".If there are more PSs to be registered, click Continue to resume or Cancel to terminate the registration.If not, click Close.Once a PS is successfully registered, the status of the PS will update to show "Registered".De-registrationFollow the steps below to de-register the PS.1. Click De-registration.A dialogue box will appear. Registered extension numbers are displayed on the left.2. Highlight numbers and click the right arrow to select them for de-registration. Click Next.A dialogue box will appear.350 PC Programming Manual3.48 [1-2] Portable Station
