1.6 Memory Dialling Features90 Feature Guide1.6.1.4 Last Number RedialDescriptionEvery extension automatically saves the last external telephone number dialled to allow thesame number to be dialled again.Automatic Redial:If Last Number Redial is performed in hands-free mode and the called party is busy, rediallingwill be automatically retried a preprogrammed number of times ( Automatic Redial RepeatTimes [205]) at preprogrammed intervals ( Automatic Redial Interval [206]). The Redial CallNo-answer Ring Duration time is programmable.This feature is available only on certain PT models which have the SP-PHONE button.Outgoing Call Log:The last five dialled numbers are automatically stored at each extension. A display PT user canredial easily any of the stored numbers.Conditions• The memorised telephone number is replaced by a new one.• If any dialling operation is done or an incoming call is answered during Automatic Redial,Automatic Redial is cancelled.• Automatic Redial is not available for some countries/areas when using an analogue trunk.• Interrupt RedialWhen the called party or the seized trunk is busy, it is possible to press the REDIAL buttoncontinuously until the called party or the trunk becomes idle. There is no need to go off-hook, before pressing the REDIAL button.• Outgoing Call Log Display by REDIAL ButtonPressing the REDIAL button on a display DPT while on-hook can display the Outgoing CallLog. System programming is required for this operation.User Manual ReferencesUser Manual1.2.3 Redial1.11.1 Using the Call Log
