1.1 Incoming Call FeaturesFeature Guide 291.1.1.6 Intercept RoutingDescriptionProvides automatic redirection of incoming trunk calls. There are two types of Intercept Routingas follows:The available intercept destination is as follows:Type 1: The destination assigned on the extension port which the original destination joins.( Extension Intercept Destination [604])Type 2: The destination assigned on the trunk group which receives the call.( Trunk Group Intercept Destination [470])Feature DescriptionIntercept Routing—NoAnswer (IRNA)If a called party does not answer a call within a preprogrammedtime period (Intercept time) ( Intercept Time [203]), it isredirected to the preprogrammed destination.Intercept Routing—Busy/DNDIf a called party is busy or in DND mode, the call is redirected tothe preprogrammed destination.Original Destination The Available Intercept DestinationWired Extension (PT/SLT/ISDNExtension/T1-OPX)Type 1PS Type 1Incoming Call Distribution Group Intercept Routing—Overflow in an Incoming CallDistribution Group works ( 1.2.2.5 OverflowFeature). The overflow destination is assigned onthe incoming call distribution group which theoriginal destination joins ( Destination forOverflow Time Expiration [625]).PS Ring Group Type 2VM Group (DTMF/DPT) Type 2External Pager (TAFAS) Type 2DISA Type 2*Analogue/ISDN RemoteMaintenanceNot availableIdle Line Access no. + Phone no. Not availableTrunk Group Access no. +Trunk Group no. + Phone no.Not availableOther PBX Extension (TIE with noPBX Code)Not availableOther PBX Extension (TIE with PBXCode)Not available
