Panasonic KX-TCD560NZ Operating Instructions Manual

Panasonic KX-TCD560NZ Operating Instructions Manual Manual pdf 24 page image

Useful Telephone Settings246 Press {ih}.Note:L The handset will not vibrate while on thecharger.Changing ringer typesYou can change the ringer type used by thehandset.“EXT Ringer Type”: Selects the ringer foroutside calls.“INT Ringer Type”: Selects the ringer forintercom calls.“Paging Tone”: Selects the ringer heardwhen the base unit pages the handset.“Private Ring”: Allows you to set adifferent ringer for each private category (forCaller ID subscribers only).1 Press $ (centre of joystick).2 Select t, then press ,.3 Select “Ringer Option”, then press,.4 Select the desired item, then press,.L The ringer sounds using the currentringer type.5 Select the desired ringer type, thenpress ,.6 Press {ih}.Note:L If you select one of the melody ringertypes, the ringer will continue to sound forseveral seconds if the caller hangs upbefore you answer. You may hear a dialtone or no one on the line when youanswer a call.L The preset melodies in this product areused with permission of M-ZoNE Co., Ltd.Tone optionsTurning key tones on/offKey tones are tones heard when keys arepressed. Includes confirmation tones anderror tones.1 Press $ (centre of joystick).2 Select t, then press ,.3 Select “Tone Option”, then press, 2 times.4 Select “On” or “Off”, then press ,.5 Press {ih}.Display optionsSelecting the standby mode display“Base Number”: The current base unitnumber is displayed.“Handset Name”: The name of thehandset is displayed.“Off”: Only the current date and time aredisplayed.1 Press $ (centre of joystick).2 Select t, then press ,.3 Select “Display Option”, then press, 2 times.4 Select the desired setting, then press,.5 Press {ih}.Selecting the talk mode displayYou can change what is shown on thedisplay when you make a call.“Talk Time”: The length of the current callwill be displayed.“Phone Number”: The phone number youdialled will be displayed.1 Press $ (centre of joystick).2 Select t, then press ,.3 Select “Display Option”, then press,.