1.1 General Features92 Feature ManualConditions• Access to the host PBX during a conversation is also possible ( 1.1.56 External Feature Access(EFA)).• TRSTRS checks only the dialed telephone number, excluding the Host PBX Access code, when accessingthe telephone company through the host PBX ( 1.1.117 Toll Restriction (TRS)).• SMDRThe Host PBX Access code can be logged by SMDR along with the dialed number when accessing thetelephone company through the host PBX ( 1.1.112 Station Message Detail Recording (SMDR)).Programming Manual References[PT Programming][403] Host PBX Access Code[417] Pause Time[PC Programming]9.3.3 Detail [3-3]—Host PBX Access Codes, Pause TimeFeature Manual References1.1.56 External Feature Access (EFA)1.1.98 Pause Insertion1.1.112 Station Message Detail Recording (SMDR)1.1.117 Toll Restriction (TRS)1.1.66 Hot LineDescriptionA single line telephone (SLT) user can make an outgoing call to a previously stored telephone number (upto 32 digits) simply by going off-hook. If the Hot Line feature is set and the user goes off-hook, a special dialtone (dial tone 2) is generated for a preprogrammed time period ( [203] Hot Line Waiting Time), and thendialing starts. During this waiting time, the user can dial another party, overriding the Hot Line feature.This feature is also known as Pickup Dialing.Conditions• This feature cannot be programmed on rotary SLTs.• This feature will not function when the extension user goes off-hook to answer an incoming call orretrieve a call on hold.Programming Manual References[PT Programming][203] Hot Line Waiting Time[PC Programming]9.1.7 Timers [1-6]—Start Time—Hot Line
