1.1 General FeaturesFeature Manual 45<Modification Flowchart>3. Displaying the Caller's NameWhen a call containing Caller ID information is received, the PBX will search for the caller's name in thefollowing order, then show that name on the display.1) The System Speed Dialing Table2) The Caller ID information received from the telephone companyIf a caller's name is not stored in the PBX or sent from the telephone company, it will not be displayed.Conditions[General]• Hardware Requirement: An optional Caller ID card for outside (CO) lines 4–8.[Caller ID Display on SLT]• Caller ID Display on SLT feature applies to:Intercom calls and outside (CO) line calls.Intercom calls include forwarded calls, calls from Transfer Recall and Hold Recall.Outside (CO) line calls include calls directed to Direct Inward System Access (DISA) ring groups,An outside (CO) line call containingCaller ID information is received.Yes NoIs the caller's area code stored inthe Caller ID Modification Table?Modifies the number according to themethod programmed in the corresponding"Local Call" field.Example:Removed number of digits: 3Added number: blankExample:Received number:Modified number:201 555 1234555 1234Modification is complete.Modified number is logged.Modification is complete.Modified number is logged.Modifies the number according to themethod programmed in the "Long-distanceCall" field.Example:Removed number of digits: 0Added number: 1Example:Received number:Modified number:313 555 12341 313 555 1234
