1.1 General FeaturesFeature Manual 23[PC Programming]9.1.7 Timers [1-6]—Start Time—Call Forwarding9.2.1 Main [2-1]—Call Forward to CO9.2.2 Feature settings [2-2]—FWD/DND9.8.1 Main [8-1]—BV for ExtensionFeature Manual References1.1.59 Fixed Buttons1.1.61 Flexible ButtonsOperating Manual References1.3.7 Built-in Voice Message (BV)1.3.9 Call Forwarding (FWD)—SUMMARY1.3.88 Voice Mail Integration3.1.3 Flexible Button Assignment—FWD/DND button1.1.11 Call Forwarding (FWD)—All CallsDescriptionAll calls are forwarded to another extension.Conditions• This feature does not apply to calls from Hold Recall and Camp-on Recall.• The types of calls that are forwarded by this feature are:• When a call is forwarded, the corresponding message waiting indication is not forwarded. TheMESSAGE button light or Message/Ringer Lamp turns on only at the originally called extension (1.1.82 Message Waiting).• It is programmable whether the calls received on outside (CO) lines programmed as "Normal" ( [414-416] CO Line Mode—Day/Night/Lunch) are forwarded for each extension or not ( [963] CallForwarding Selection). If FWD is enabled for an extension whose FWD destination is a VPS orTelephone Answering Machine (TAM) and the extension has been assigned to ring with otherextensions, the VPS or TAM may answer the call before other extensions can answer it. To prevent this,disable FWD.• A call can only be automatically forwarded one time. In the example below, extension A's calls are beingforwarded to extension B. If extension B tries to set FWD to extension C, the extension B user hears areorder tone and the setting is denied. If extension B has already set FWD to extension C, andextension A tries to set FWD to extension B, the setting is also denied.Call TypeOutside (CO) line calls Normal, Direct In Line (DIL), Direct Inward System Access (DISA)Intercom calls Extension, Transfer
