1.1 General FeaturesFeature Manual 31Feature Manual References1.1.15 Call Hold2.2.1 Tones/Ring TonesOperating Manual References1.3.17 Call Hold Retrieve1.1.18 Call Log, IncomingDescriptionWhen a call containing Caller ID information is received by an extension, the information is shown on thetelephone display, notifying the extension user of the caller's identity.This information is also automatically logged in the Incoming Call Log of the extension, and can be viewedlater or used to call that caller back.There are 2 types of call log areas available in the PBX. One is the personal area, which stores logs of callsreceived by each extension when a call arrives at a certain proprietary telephone (PT).The other is the common area, which stores a log of calls arriving at multiple PTs or via the Intercept Routingfeature. Caller ID information can be logged by the following methods:• Logged automatically when no one answers calls.• Logged automatically if an extension user presets logging of the caller's information whenanswering calls.• Logged manually by pressing the Caller ID Indication button during a conversation.• Logged automatically when a caller leaves a voice message ( 1.1.8 Built-in Voice Message (BV))[Example]*1 If the Call Waiting Caller ID feature is enabled for one or more outside (CO) lines ( [913] CallWaiting Caller ID Assignment), the sequence number such as "002:" will be deleted and subsequentinformation (Caller's number, etc.) will be moved to the left side of the display.*2 "New" is displayed for call records that have not previously been viewed;"Old" is displayed for call records that have previously been viewed.Both new and old call records are stored in each personal and common area.PersonalCommonCaller ID Indication buttons--- Date and time of call--- Caller's name--- Caller's numberPersonalCommonCaller ID Selection buttonsNew:002 Old:001 --- Status*2 & number of logged calls002:JOHN WHITE002: 0011223344002: May15 10:23AIf the information is stored in record "002"*1 ,
