Panasonic Eco Solutions Nordic ABMEW01622 Rev: - EBL128 Planning Instructions V2.0.x1Table of contents1 Introduction________________________________ 82 Definitions / Explanations ___________________ 102.1 PESN AB _______________________________________ 102.2 Alarm point ______________________________________ 102.2.1 Smoke detector _______________________________ 102.2.2 Sensor ______________________________________ 102.2.3 Analog detector _______________________________ 102.2.4 (Analog) Sensor Base (ASB) ____________________ 102.2.5 Conventional detector __________________________ 102.2.6 Conventional Detector Base (CDB) _______________ 102.2.7 Addressable __________________________________ 102.2.8 Old detector __________________________________ 112.2.9 Conventional zone line _________________________ 112.2.10 Addressable zone interface ______________________ 112.3 Output unit ______________________________________ 112.4 Output / Control output _____________________________ 112.5 Short circuit isolator _______________________________ 112.6 Display unit (D.U.) ________________________________ 112.7 COM loop _______________________________________ 112.8 Control Unit (C.U.) / C.I.E. __________________________ 112.9 Fire Brigade Panel (FBP) ___________________________ 112.10 Control panel (CP) ________________________________ 122.11 LED ____________________________________________ 122.12 External Indicator (LED) ___________________________ 122.13 Display / LCD ____________________________________ 122.14 Door open / Key switch_____________________________ 122.15 Site Specific Data (SSD) ____________________________ 122.16 Software (S/W) / Firmware / System program ___________ 122.17 EBLWin ________________________________________ 122.18 Web-server ______________________________________ 123 Overview _________________________________ 133.1 The EBL128 c.i.e. _________________________________ 133.1.1 Expansion boards _____________________________ 133.1.2 Power supply _________________________________ 133.2 S/W Versions ____________________________________ 133.3 Documents ______________________________________ 133.4 Applications _____________________________________ 143.5 PC S/W _________________________________________ 144 Control & Indicating Equipment _____________ 154.1 COM loop _______________________________________ 174.1.1 A single break (cut-off) on the COM loop __________ 184.1.2 Several breaks (cut-offs) on the COM loop _________ 19
